Steve Miller, MathWorks
In this webinar we demonstrate how to model and simulate multibody dynamics using SimMechanics. We show you how to define your multibody system using blocks representing bodies, joints, constraints, and forces. You will be able to simulate multibody dynamics in systems such as robots, vehicle suspensions, construction equipment, and landing gear.
This webinar includes demonstrations and explanations to show you how to:
Simulation of multibody dynamics starts with the model you build. SimMechanics enables you to define modular mechanical components that can be easily reused in other systems. The MATLAB variables you use to parameterize your model can be automatically tuned to meet design requirements, or tested throughout a given range to see their effect on system performance. Combining SimMechanics models with Simscape components and control systems modeled in Simulink makes it possible to simulate and analyze your entire mechatronic system in a single simulation environment.
View example code from this webinar here:
About the Presenter: Steve Miller is responsible for the technical marketing of the physical modeling products at MathWorks. Steve joined MathWorks as an Application Engineer in 2005 and moved to the Design Automation Marketing group in 2006. Prior to that, Steve worked at Delphi Automotive in Braking Control Systems and at MSC.Software as an Adams specialist, consulting in various capacities at Ford, GM, Hyundai, BMW, and Audi. Steve has a B.S. in Mechanical Engineering from Cornell University and an M.S. in Mechanical Engineering from Stanford University.
Grabados: 10 may 2012