Main Content

DiagnosticOperationCycleCaller

Call AUTOSAR Diagnostic Event Manager (Dem) service interface OperationCycle

  • Library:
  • AUTOSAR Blockset / Classic Platform / Basic Software / Diagnostic Event Manager (Dem)

  • DiagnosticOperationCycleCaller block

Description

For the AUTOSAR Classic Platform, the AUTOSAR standard defines important services as part of Basic Software (BSW) that runs in the AUTOSAR Runtime Environment (RTE). Examples include services provided by the Diagnostic Event Manager (Dem), the Function Inhibition Manager (FiM), and the NVRAM Manager (NvM). In the AUTOSAR RTE, AUTOSAR software components typically access BSW services by using client-server communication.

To support system-level modeling and simulation of AUTOSAR components and services, AUTOSAR Blockset provides an AUTOSAR Basic Software block library. The library contains preconfigured blocks for modeling component calls to AUTOSAR BSW services and reference implementations of the BSW services.

As defined in the AUTOSAR specification, the Function Inhibition Manager provides a control mechanism for selectively inhibiting (deactivating) function execution in software component runnables based on function identifiers (FIDs) with inhibit conditions.

The Function Inhibition Manager is closely related to the Diagnostic Event Manager because inhibiting conditions can be based on the status of diagnostic events. An operation cycle affects events that share the same Diagnostic Service Component. The DiagnosticOperationCycleCaller block calls the Dem service interface OperationCycle to control operation cycles.

Parameters

expand all

Enter the name of the client port the AUTOSAR software component uses to call the Dem service interface OperationCycle.

Select a Dem operation to control or monitor operation cycles. To start and stop operation cycles, select SetOperationCycleState. To query the current state of an operation cycle, select GetOperationCycleState. After you select an operation, the inports and outports for the block are generated to support that operation.

Enter a value to control the start or stop of component operation cycles. To start operation cycles, enter the value Enum:Dem_OperationCycleStateType.DEM_CYCLE_STATE_START. To end operation cycles, enter the value Enum:Dem_OperationCycleStateType.DEM_CYCLE_STATE_END.

Dependencies

Specify this parameter when Operation is set to SetOperationCycleState.

Block sample time. The default sets the block to inherit its sample time from the model.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Introduced in R2020a