Documentation

Compand a Signal

In certain applications, such as speech processing, it is common to use a logarithm computation, called a compressor, before quantizing. The inverse operation of a compressor is called an expander. The combination of a compressor and expander is called a compander.

The compand function supports two kinds of companders: µ-law and A-law companders. Its reference page lists both compressor laws.

Quantize and Compand an Exponential Signal

Quantize an exponential signal with and without companding and compare the mean square distortions.

Set the μ-law parameter Mu.

Mu = 255;

Create an exponential signal and find its maximum value.

sig = exp(-4:0.1:4);
V = max(sig);

Quantize the signal using equal-length intervals. Set the partition and codebook arguments assuming six bit quantization.

partition = 0:2^6-1;
codebook = 0:2^6;
[~,~,distor] = quantiz(sig,partition,codebook);

Compress the signal using the compand function. Apply quantization and expand the quantized signal. Calculate the mean square distortion.

compsig = compand(sig,Mu,V,'mu/compressor');
[~,quants] = quantiz(compsig,partition,codebook);
newsig = compand(quants,Mu,max(quants),'mu/expander');
distor2 = sum((newsig-sig).^2)/length(sig);

Compare the mean square distortions. The output shows that the distortion is smaller when companding is used. This is because equal-length intervals are well suited to the logarithm of sig but not well suited to sig itself.

[distor, distor2]
ans = 1×2

0.5348    0.0397

Plot the signal and its companded version.

plot([sig' compsig'])
legend('Original','Companded','location','nw') 