Triggered To Workspace
Write input sample to MATLAB workspace when triggered
DSP System Toolbox / Sinks
The Triggered To Workspace block creates a matrix or array variable in the MATLAB® workspace, where it stores the acquired inputs at the end of a simulation. The block overwrites an existing variable with the same name.
To save a record of the sample time corresponding to each sample value, open the Configuration Parameters dialog box. To open the Configuration Parameters, in the Modeling tab of the Simulink® model toolstrip, click Model Settings. In the left pane of the window that opens, click Data Import/Export and select the Time check box.
The nontriggered version of this block is the To Workspace (Simulink) block.
Input — Data to log to workspace
scalar | vector | matrix | bus
Specify the data to log to the workspace when the block receives a trigger at the Trigger port. The Triggered To Workspace block supports logging real and complex data of any built-in data type or user-defined data types such as buses, enumerations, and fixed-point data.
Logging fixed-point data requires a Fixed-Point Designer™ license.
fixed point |
Complex Number Support: Yes
Trigger — Trigger signal
scalar | vector | matrix
Specify the trigger signal that controls the execution of the block as a scalar, vector, or a matrix.
Trigger type — Trigger type
Rising edge (default) |
Falling edge |
The type of event that triggers the execution of the block.
The block acquires and buffers a single frame from input 1 whenever it is triggered by the control signal at input 2 (). At all other times, the block ignores input 1. You specify the triggering event at input 2 using the Trigger type parameter:
Rising edgetriggers execution of the block when the trigger input rises from a negative value to zero or a positive value, or from zero to a positive value.
Falling edgetriggers execution of the block when the trigger input falls from a positive value to zero or a negative value, or from zero to a negative value.
Either edgetriggers execution of the block for a
Rising edgeor a
Variable name — Workspace variable name
yout (default) | character vector | string
The name of the workspace variable in which to store the data. By default, the
Triggered To Workspace block saves logged data in a
yout. When a model contains multiple
Triggered To Workspace blocks, you must specify a unique
value in the Variable name parameter of
Decimation — Decimation factor
1 (default) | scalar
Specify a decimation factor to reduce the effective sample rate for the logged data. For
a decimation factor D the Triggered To
Workspace block logs the value of every
Dth sample. For example,
when you specify the Decimation value as
2, the Triggered To Workspace block
logs every other data point.
For more information about controlling which samples the block logs during simulation, see Specify Signal Values to Log (Simulink).
Maximum number of rows — Maximum number of rows to be saved
1000 (default) | positive integer
Specify the maximum number of rows (one row per time step) that the block saves (P) as a positive integer.
Save 2-D signals as — Arrangement of 2-D samples values in logged data
2-D array (concatenate along first
dimension) (default) |
3-D array (concatenate along third
Specify whether the block saves 2-D signals as a 2-D or 3-D array in the MATLAB workspace.
When you select:
2-D array (concatenate along first dimension)— The block vertically concatenates each M-by-N matrix input with the previous input to produce a 2-D output array. The block saves the data as a P-by-N matrix, where P is the value of the Maximum number of rows parameter.
When the simulation progresses long enough for the block to acquire more than P samples, the block stores only the most recent P samples. The Decimation factor D allows you to store only every Dth input matrix.
3-D array (concatenate along third dimension)— The block saves an M-by-N input as a 3-D array in which each M-by-N page represents a single sample from each of the M*N channels (the most recent input matrix occupies the last page). The maximum size of this 3-D array is limited to M-by-N-by-P, where P is the value of the value of the Maximum number of rows parameter.
When the simulation progresses long enough for the block to acquire more than P inputs, the block stores only the last P inputs. The Decimation factor D allows you to store only every Dth input matrix.
Log fixed-point data as a fi object — Log fixed-point data as a
off (default) |
Specify how to log fixed-point input data. By default, the
Triggered To Workspace block logs fixed-point input data
double. When you select this parameter, the
Triggered To Workspace block logs fixed-point input as a
fi (Fixed-Point Designer) object.
Using the Triggered To Workspace block to log fixed-point data requires a license for Fixed-Point Designer.
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
HDL Code Generation
Generate VHDL, Verilog and SystemVerilog code for FPGA and ASIC designs using HDL Coder™.
This block can be used for simulation visibility in subsystems that generate HDL code, but is not included in the hardware implementation.
Design and simulate fixed-point systems using Fixed-Point Designer™.
Introduced before R2006a