Communication interface

Transport layer external mode uses to exchange data

expand all in page

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / External mode

Description

The Communication interface parameter selects the transport layer that external mode uses to exchange data between the host computer and the target hardware.

Dependencies

None

Settings

TCP/IP (default) | XCP on TCP/IP

The Communication interface parameter selects TCP/IP or XCP on TCP/IP as the transport layer that external mode uses to exchange data between the host computer and the target hardware.

Examples

expand all

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to ARM Cortex-A9 (QEMU) and click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. From the External mode group, select a Communication interface from the drop down list and click Apply.

  5. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b

See Also