Main Content

Receive mode

Receive mode to configure USART/UART module

Since R2024b

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / UART/USART

Description

Select one of the following parameters of receive mode to configure USART/UART module. By default, Buffered mode using RXNE interrupt is selected.

  • Buffered mode using RXNE interrupt

  • Buffered mode using DMA

  • Polling mode

Settings

Buffered mode using RXNE interrupt | Buffered mode using DMA | Polling mode

Select one of the following parameters of receive mode to configure USART/UART module. By default, Buffered mode using RXNE interrupt is selected.

  • Buffered mode using RXNE interrupt

  • Buffered mode using DMA

  • Polling mode

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2024b