Base rate task priority

Static priority of base rate task of Simulink model

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Operating system/scheduler

Description

The Base rate task priority parameter sets the static priority of the base rate task of the Simulink^® model when deployed to the hardware.

Dependencies

None

Settings

40 (default)

The static priority of the base rate task of the Simulink model when deployed to the hardware.

Examples

Set Base Rate Task Priority

1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameters dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to either:

   • Xilinx Zynq ZC702 evaluation kit

   • Xilinx Zynq ZC706 evaluation kit

   • ZedBoard

   Then, click Apply.

   The parameter values under Hardware board settings are automatically populated to their default values.

4. If you chose Xilinx Zynq ZC706 evaluation kit or ZedBoard, set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.

5. Change the Base rate task priority from the default value to the selected value and click Apply.

6. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b