This library contains sensors for the gas domain. These blocks output physical signals, not regular Simulink® signals. For information on how to connect these blocks to Simulink scopes or other Simulink blocks, see Connecting Simscape Diagrams to Simulink Sources and Scopes.
|Mass & Energy Flow Rate Sensor (G)||Measure mass and energy flow rates|
|Pressure & Temperature Sensor (G)||Measure pressure and temperature differences|
|Thermodynamic Properties Sensor (G)||Measure specific enthalpy, density, specific heat at constant pressure, and specific entropy|
|Volumetric Flow Rate Sensor (G)||Measure volumetric flow rate|
- Modeling Gas Systems
Steps and guidelines for gas system modeling.
- Simple Gas Model
This example shows how to create a simple open-loop gas network and set boundary conditions.
- Change Flow Boundary Conditions
This example shows how to change the gas flow boundary conditions without affecting temperature.
- Change Flow Direction
This example shows how the change in the gas flow direction affects the upstream temperature.