Esta página es para la versión anterior. La página correspondiente en inglés ha sido eliminada en la versión actual.
Ethernet Shield
Bloques Arduino Ethernet.
Cree y configure modelos de Simulink® con bloques de Ethernet Shield.
Bloques
| TCP/IP Receive | Receive data over TCP/IP network from remote host |
| TCP/IP Send | Send data over TCP/IP network to another remote host |
| UDP Receive | Receive data over UDP network from remote host |
| UDP Send | Send data over UDP network to remote host |
| ThingSpeak Read | Read data stored in ThingSpeak channel |
| ThingSpeak Write | Publish data to Internet of Things using ThingSpeak |
Temas
- Connect Arduino Ethernet Shield to Arduino Hardware
Follow the steps to connect the Arduino Ethernet Shield to an Arduino hardware board.
- Configure Network Settings for Arduino Ethernet Shield
Follow the steps to configure the network settings for Arduino Ethernet Shield.
- Configure Model to Run in External Mode over Ethernet
Follow the steps to simulate model in external mode using over the TCP/IP network.
Ejemplos destacados
Use Ethernet Shield with Arduino Hardware
Use Simulink® Support Package for Arduino® hardware to receive and send TCP/IP or UDP messages using an Arduino with an Ethernet Shield.
