Automatic solver parameter selection

Diagnostic action to take when the software changes a solver parameter value

Model Configuration Pane: Diagnostics

Description

The Automatic solver parameter selection parameter specifies the diagnostic action to take when the software changes the value of a solver parameter during simulation, including both of these situations:

• The software changes the value of a parameter with an explicitly specified value.

  For example, if you select a continuous solver for a model that does not contain continuous states, the software changes the solver selection to the discrete solver.

• The software determines the value for a parameter with a value that specifies that the software chooses the parameter value.

  For example, when the Min step size parameter value is auto, the software determines the minimum step size.

  The software does not issue this diagnostic when determining the Solver parameter value for simulation when the value in the model is auto.

Settings

none (default) | warning | error

none

The software does not issue a diagnostic.

warning

The software issues a warning.

error

The software issues an error and terminates the simulation.

Programmatic Use

Parameter: SolverPrmCheckMsg

Type: string | character vector

Value: "none" | "warning" | "error"

Default: "none"

Version History

Introduced before R2006a