Stop time
Description
Specify the stop time for the simulation or generated code as a double-precision value, scaled to seconds.
Category: Solver
Settings
Default:
10
Stop time must be greater than or equal to the start time.
Specify
inf
to run a simulation or generated program until you explicitly pause or stop it.If the stop time is the same as the start time, the simulation or generated program runs for one step.
Simulation time is not the same as clock time. For example, running a simulation for 10 seconds usually does not take 10 seconds. Total simulation time depends on factors such as model complexity, solver step sizes, and computer speed.
If your model includes blocks that depend on absolute time and you are creating a design that runs indefinitely, see Blocks That Depend on Absolute Time.
Programmatic Use
Parameter:
StopTime |
Type: character vector |
Value: any valid value |
Default:
'10.0' |