Custom I/O Driver Basics

You can write custom I/O device drivers to work with Simulink^® Desktop Real-Time™ applications.

Note

Do not use Analog Input, Analog Output, Digital Input, or Digital Output drivers as starting points for creating custom device drivers.

Supported C Functions

You can use ANSI^® C functions that do not use the operating system in your custom blocks or I/O drivers. The following includes a partial list of supported functions:

• Console I/O — printf

  The printf function sends output to the MATLAB^® Command Window when it is called from the real-time application.

• Data conversion — abs, atof, atoi, atol, itoa, labs, ltoa, strtod, strtol, strtoul, ultoa

• Memory allocation — calloc, free, malloc

  Memory allocation is not an operation that can be done in real time. To work with a Simulink Desktop Real-Time application, memory management must occur before real-time simulation begins. Simulation switches into real time after mdlStart, so you can allocate memory in mdlInitializeSizes or mdlStart. You cannot allocate memory in any function after mdlStart, such as mdlOutputs or mdlUpdate.

• Memory manipulation — _memccpy, memcpy, memchr, memcmp, _memicmp, memmove, memset

• Character string manipulation — strcat, strchr, strcmp, strcpy, strcspn, _strdup, _stricmp, strlen, _strlwr, strncat, strncmp, strncpy, _strnset, strpbrk, strrchr, _strrev, _strset, strspn, strstr, strtok, strupr

• Mathematical — acos, asin, atan, atan2, ceil, cos, cosh, div, exp, fabs, floor, fmod, frexp, ldexp, ldiv, log, log10, max, min, modf, pow, rand, sin, sinh, sqrt, srand, tan, tanh, uldiv

• Character class tests and conversion — isalnum, isalpha, _isascii, iscntrl, isdigit, isgraph, islower, isprint, ispunct, isspace, isupper, isxdigit, isxupper, isxlower, _toascii, tolower, toupper

• Searching and sorting — bsearch, qsort

• Dummy functions — exit, fprintf

Unsupported C Functions

If you create your own custom I/O driver blocks, use only C functions that Simulink Desktop Real-Time supports. Simulink Desktop Real-Time does not support functions that use the operating system. This category includes functions from vendor-supplied driver libraries for the operating system, which are also not supported.

The following list includes many, but not all, of the unsupported functions:

• File I/O — fopen, freopen, fclose, fread, fwrite, fputs, fputc, fgets, fgetc, gets, getc, getchar, puts, putc, putchar, fflush, setbuf, setvbuf

• Console I/O — fprintf, sprintf, vfprintf, vprintf, vsprintf, fscanf, scanf, sscanf

• Process management — spawn, exit, abort, atexit

• Signals and exceptions — signal, longimp, raise

• Time functions — clock, time, difftime, asctime, ctime, difftime, gmtime, localtime, mktime, strftime

• Operating system API functions — No operating system API functions, such as Win64 functions, are supported .

Incompatibility with Operating System API Calls

The Simulink Desktop Real-Time kernel intercepts the interrupt from the system clock. It then reprograms the system clock to operate at a higher frequency for running your real-time application. At the original clock frequency, it sends an interrupt to the operating system to allow software that uses the operating system API to run.

As a result, software that uses the operating system API, such as Win64 functions, cannot be executed as a component of your real-time application. Software you use to write I/O drivers must not make calls to the operating system API.

I/O Register Access from S-Functions Limitation

Operating system drivers can access I/O registers only from the real-time kernel and not from the Simulink software. To prevent drivers from attempting to access I/O registers from Simulink S-functions, enter code fragments like the following:

#ifndef MATLAB_MEX_FILE
/* we are in real-time kernel, do board I/O */
#else
/* we are in Simulink, don't do board I/O */
#endif