Legacy Serial Write
Write output data for baseboard serial communications
Simulink Real-Time / RS232 / Mainboard
The Legacy Serial Write block writes output data for baseboard serial communications.
Input — Data for serial port write
The Input port contains the data to write for the serial port.
Serial port — Select serial port
Legacy Serial Port 1 (default) | .. |
Legacy Serial Port 8 |
USB Serial Port 1 | .. |
USB Serial Port 8
Select the RS232 serial port for communications. If using USB-to-serial adapters,
the target computer detects these adapters as
serusb2, and so on in the order that the adapters are connected to
the serial devices. The order of port assignment is retained through the power cycle of
the target computer or serial device if there is no change in the connections to the
Output Datatype — Select output data type
8 bit uint null terminated (default) |
8 bit int null terminated |
count+16 bit uint |
count+16 bit int |
count+32 bit uint |
count+32 bit int
Use this value to select the output data type.
SampleTime — Select sample time in seconds
.01 (default) | double
Use this value to select the sample time in seconds.
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
Version HistoryIntroduced in R2020b
R2021b: USB to Serial for RS232 Blocks
The RS232 mainboard blocks support connecting USB serial adapter ports. The
Serial port parameter of the Legacy Serial Read
block, Legacy Serial Write block, Legacy Serial Setup block,
Legacy Serial Port block, and Legacy Serial Port F block
means that you can select a
USB Serial Port or a
Legacy Serial Port.