Main Content

displayDataTypes

Display data types for all captured signals

Description

displayDataTypes(DC) displays the data type configured for each data capture signal. The default data type depends on the bit width of the captured signal in the specified data capture System object. This size is the width you specified for the port on the generated IP. If the signal is 8, 16, or 32 bits, the default data type is uint. If the signal has one bit, the default data type is boolean. If the signal is a different width, the default data type is numerictype(0,bitWidth,0).

To modify the data type of a signal, use the object function. The function supports these data types, depending on the bit width of the captured signal: boolean, uint8, int8, uint16, int16, half, uint32, int32, single, uint64, int64, double, and numerictype.

Input Arguments

collapse all

Customized data capture object, specified as an hdlverifier.FPGADataReader System object.

Version History

Introduced in R2017a