Configure a TCP client application that uses the specified Ethernet interface
Simulink Real-Time / TCP
Configure a TCP client application and initialize a network interface for the application.
The combination of Client IP Address and Subnet mask must be unique across all Ethernet cards in the target computer, including the card for communicating between the development and target computers. Distinguish cards by specifying a different subnet for each. The subnet is the IP address masked by the subnet mask.
The Simulink® Real-Time™ TCP blocks function only when executed on the target computer. When simulated on the development computer, they do nothing.
Use host-target connection— Use Ethernet connection between development and target computers
When you select this parameter, it deactivates the Client IP address,
Subnet mask, PCI bus, and
PCI slot parameters and excludes the ports
22223 from use by
Client IP address— IP address of the client device that is being configured
invalid IP addresses.
To activate this parameter, clear the Use host-target connection parameter.
Function— PCI function number of Ethernet card
0(default) | integer
Enter the PCI function number for the Ethernet card.