If the Speedgoat target machine has multiple Ethernet cards, you could be guided by Speedgoat support to specify which card to use for the Ethernet link.
In the Speedgoat documentation, see information about the Ethernet index of the PCI cards in the Speedgoat target machine.
Use the following procedure for target
Real-Time™ Explorer. In the Command Window, type:
In the Targets pane, expand the target computer node.
In the toolbar, click the Target Properties button .
From the Speedgoat target
machine documentation, note the index of the Ethernet card that you want to use for the
Ethernet link, for example,
In the Command Window, type:
tg.ShowHardware = 'off'; tg.EthernetIndex = '#';
# is the index of the Ethernet card, for example,
slrtexplr, set Boot mode to
Click Create boot disk.
Start the target computer from the target computer boot switch.
The kernel selects the specified Ethernet card as the
target computer card, instead of the
default card with index number
Repeat this procedure as required for each target computer.