Borrar filtros
Borrar filtros

Azimuth compression Passive SAR

16 visualizaciones (últimos 30 días)
Miguel Albuquerque
Miguel Albuquerque el 5 de Jul. de 2022
Respondida: Aditya el 14 de Sept. de 2023
Hey guys,
Does anyone Know how to perform azimuth compression, on a passive SAR simulator?
Thanks in advance

Respuestas (1)

Aditya
Aditya el 14 de Sept. de 2023
Hey Miguel,
I understand that you want to perform azimuth compression on a passive SAR simulator.
Performing azimuth compression in a passive synthetic aperture radar (SAR) simulator involves several steps. Here's a high-level overview of the process:
1. Data collection: Simulate the data collection process by modeling the radar system and its interaction with the scene of interest. This includes specifying the parameters such as the radar platform motion, antenna characteristics, and signal processing techniques.
2. Range compression: Apply range compression to the collected data. Range compression focuses the received radar signals along the range dimension to improve range resolution. This is typically done using matched filtering or other range compression techniques.
3. Doppler processing: Perform Doppler processing to account for the motion-induced Doppler shifts in the received signals. This involves compensating for the Doppler frequency shifts caused by the relative motion between the radar platform and the scene.
4. Azimuth compression: Apply azimuth compression to focus the SAR data along the azimuth dimension. Azimuth compression is typically achieved using a two-step process: azimuth matched filtering and azimuth integration.
a. Azimuth matched filtering: Apply matched filtering in the azimuth direction to enhance the signal-to-noise ratio and improve azimuth resolution. This involves correlating the received signals with the reference signal in the azimuth dimension.
b. Azimuth integration: Integrate the azimuth matched filtered data over multiple azimuth positions to form a focused SAR image. This step involves summing or integrating the azimuth matched filtered signals to enhance the signal energy and suppress noise.
5. Post-processing: Apply any necessary post-processing techniques to improve the quality of the SAR image. This may include filtering, speckle reduction, and radiometric calibration.
You may refer to the following link for further information:
Thanks,
Best Regards
Aditya Kaloji

Categorías

Más información sobre Detection, Range and Doppler Estimation en Help Center y File Exchange.

Etiquetas

Productos


Versión

R2021b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by