How to input exponentials in transfer functions using Simulink?
241 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
This is my transfer function but I don't know how to input this on Simulink.
0 comentarios
Respuestas (3)
Sam Chak
el 22 de Mzo. de 2023
You can insert the Transport Delay block (found in the Library of Continuous function blocks) after the transfer function.
See example here:
0 comentarios
Walter Roberson
el 22 de Mzo. de 2023
If this must be implemented as transfer functions then you will need to copy the transfer function block several times, set the Input Delay differently on each copy, and then add the results all together.
Each individual transfer function can only represent a single exp(), not a sum of exp()
3 comentarios
Paul
el 22 de Mzo. de 2023
Neither the Transfer Fcn nor the State Space block can model an Input Delay (nor Output Delay) as far as I can tell.
Walter Roberson
el 30 de Mzo. de 2023
Paul
el 22 de Mzo. de 2023
In addition to using a single transfer function along with gains and transport delays as suggested by @Sam Chak, if you have the Control SystemToolbox, you can use one LTI System block and enter the transfer function as the LTI system variable parameter. For example, if
H(s) = 1/(s +1)*(exp(-1*s) - exp(-0.5*s))
then the expression for the block parameter would be:
tf(1,[1 1])*( exp(-1*tf('s')) - exp(-0.5*tf('s')) )
0 comentarios
Ver también
Categorías
Más información sobre Interactive Model Editing en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!