Error: Phasor block is not allowed with the Continuous or Discrete simulation method

Hi,

I am simulating a microgrid which consists of a synchronous machine (which models a diesel generator), wind turbine and load. The wind turbine model requires a phasor simulation type (in the configuration parameter of the powergui). However, the rest of models require a discrete simulation type. Running the simulation for the microgrid model using a discrete simulation type gave the error:

The 'microgridModel_DG_WT_Load/Wind Subsystem/B25_WF Bus Data acquisition/Sequence Analyzer (Phasor Type)' Phasor block is not allowed with the Continuous or Discrete simulation method.

May I know how do I go about solving this problem? Any help or advice would really be greatly appreciated!

[Diego Morales]

Hi . maybe did you find the solution ?

I am building a hybrid phasor/discrete simulation and needing help.

Answer 1

[Muruganandham Subramanian]

Betterway, you can do this by Continuous or discrete simulation by designing the wind turbine model(i.e Insteadof directly using wind turbine model from library, Use seperately sync. g/r and wind turbine from simscape library)to design fro your purpose.

_Error is because of Phasor type--> frequency analysis (1/time).

Either you can do time domain analysis or phasor analysis is possible for single simulation model_

Answer 2

[Aleksey Kovyazin]

I could try to help you to solve this problem. My skype: jiektop Find me and we try to make your model together.

[wang li]

would you like give me the answer too? the same problem appear in my simulation

[Youcef Islam]

i got the same problem ,, i'd like to add you on skype ,willing you could help me , i'll be gratful ,, thnx in advance,, my skype is : youcef.islam48

[Marzia akbari]

I have the same issue. Any ideas? can I also get some advice about this Aleksey? Thanks, M

Answer 3

[Prashant Tiwari]

Hi there,

I am getting same error. Can anyone help me out for this error.

Thanking you