Which hardware board should I use for DRV8312?

2 visualizaciones (últimos 30 días)
Karol Kyslan
Karol Kyslan el 11 de Abr. de 2019
Comentada: Antonin el 12 de Abr. de 2019
I am using DRV8312-69M-KIT with control card F2806x ISO control card Release 0.4 that contains processor F28069MPZT. For automatic code generation, which hardware board should I use when doing settings in Matlab -- > Configuration Parameters -- > Hardware Implementation. F2806x or F28069M LaunchPad?

Respuesta aceptada

Antonin
Antonin el 12 de Abr. de 2019
Hi Karol,
For the F2806x ControlCard, the F2806x will have better default compared to the F28069M LaunchPad.
Things to keep in mind:
  • F2806x and F28069M LaunchPad trigger the same configuration with different deafult settings.
  • If your controlCard is using an F28069M (not F28069), make sure to select the correct processor under Hardware impementation > Target Hardware Resources > Build Options > Device Name. This is one change you have to do to run the following example: c28069pmsmfoc_ert.slx (https://www.mathworks.com/help/releases/R2018b/supportpkg/texasinstrumentsc2000/ug/permanent-magnet-synchronous-motor-field-oriented-control.html). You will have to make that change in the shipping example.
  • In the shipping example, we also have specific GPIO sttings for the eCAP to work with Hall sensors, make sure to keep these untouched. Reselecting a different processor may reset these to default values.
  • The rest will have good deafults for the kit that you are considering.
I hope it helps,
Thanks,
Antonin.
  2 comentarios
Karol Kyslan
Karol Kyslan el 12 de Abr. de 2019
Thank you for your fast repsonse. There is one more confusing issue: what about Linker Comand Files: Should I use c28069.cmd or c28069M.cmd ?
Antonin
Antonin el 12 de Abr. de 2019
If using the F28069M processor, which I believe is the one you get with the kit, you should use the c28069M.cmd. This linker command file should be selected automatically if you pick the right processor in Target Hardware Resources > Build Options > Device Name and if you don't enbale the "Use custom linker command file" option.
TI has placed IQMath Tables in a different memory location on the F28069M compared to F28069. Picking the wrong version of the processor leads to IQMath functions using these tables (like triogonometric functions) to not work correctly.
I hope it helps,
Antonin.

Iniciar sesión para comentar.

Más respuestas (0)

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by