Matlab Remote Start Service Problem, Status Of Services Problem, Status Erratic

Window 7 is on the both PC Workgroup Envirnoment "NO Domain Available" For DNS Hostfile Configuration

*How to install mdce -run cmd as Administrator and go to the distcomp direcoty -run "mdce uninstall -clean" -run "mdce install" -run "addMatlabToWindowsFirewall" -run "mdce start" -to check status run "nodestatus -remotehost *

How to create jobmanager and worker on PC1

-open admincenter as Administrator

For example PC1: Client, JM, W PC2: W

Host Name: PC1 (192.168.0.8) PC2 (192.168.0.12)

Service is called MDCE and must be isntalled and running on the JM and each Worker.

Problem 1: unable to remote start service. Example start mdce service on PC2 remotely from PC1

Problem 2: unable to check (sometimes) status of service remotely

Problem 3: service status erratic

Answer 1

[Jason Ross]

Problem 1:

• Is UAC enabled or disabled on the systems?
• Are the Administrator passwords the same on both systems?

Problem 2/3: Erratic service problems could be caused by:

• Multi-homed setup. Sometimes the packets route out one NIC, sometimes the other. Do you have multiple NICs? Are they both configured to access the same networks?
• How quick is the ping time between hosts? Are they on the same switch?
• Are there issues in any of the Event Logs?