How to fill inside of binary region?

5 views (last 30 days)
Kev on 12 Sep 2013
Edited: Ashish Uthama on 14 Oct 2013
Dear Matlab Community,
I'm working on a tool which measures the fiber diameter automatically. These fibers are made from PLA (Polylactic acid). There are different weight percent of this acid. And we are using optical microscope to obtain the image.
So I'm struggling with filling the fibres. I'm making a separate post because I haven't received any reply on there. I have used suggested technique in which you would reconstruct the image based on mask and marker image. This appears to work on 90% of the images. After completing the code, we were looking to calibrate and validate the script with images of known diameter. However, this technique doesn't appear to work on this glass fiber and we would also like to make this program more robust so that one doesn't have to change any values if the diameter is in very high or low range (5 microns/15 or 10).
Sorry for making a new post, but I'd really appreciate if there is any technique like inversing the image and filling the empty region. In one book, the author uses following approach, but I'm unable to achieve part D.
Sincerely, Kev
Kev on 12 Sep 2013
Hi Matt!
I tried imclearborder and it doesn't appear to work. It looks like it clears border of the image. It didn't remove outside of the edge.
What I'm attempting to do is, I want to make the fibers solid. Due to possible light issue, the fiber are not 100% solid and they need to be filled. From solid fiber I make a skeleton image.
For example: I have this binary image: and I want to fill the inside of fiber that is white. I'd like to fill it without morphological tool.

Sign in to comment.

Answers (2)

Image Analyst
Image Analyst on 12 Sep 2013
Try tophat and bottomhat filters:
format compact
close all;
workspace; % Make sure the workspace panel is showing.
format long g;
format compact;
fontSize = 20;
% Read in a standard MATLAB gray scale demo image.
folder = 'D:\Temporary stuff\';
baseFileName = 'WIYx0.jpg.png';
% Get the full filename, with path prepended.
fullFileName = fullfile(folder, baseFileName);
% Check if file exists.
if ~exist(fullFileName, 'file')
% File doesn't exist -- didn't find it there. Check the search path for it.
fullFileName = baseFileName; % No path this time.
if ~exist(fullFileName, 'file')
% Still didn't find it. Alert user.
errorMessage = sprintf('Error: %s does not exist in the search path folders.', fullFileName);
grayImage = imread(fullFileName);
% Get the dimensions of the image.
% numberOfColorBands should be = 1.
[rows, columns, numberOfColorBands] = size(grayImage);
if numberOfColorBands > 1
% It's not really gray scale like we expected - it's color.
% Convert it to gray scale by taking only the green channel.
grayImage = grayImage(:, :, 2); % Take green channel.
% Display the original gray scale image.
subplot(2, 2, 1);
imshow(grayImage, []);
title('Original Grayscale Image', 'FontSize', fontSize);
% Enlarge figure to full screen.
set(gcf, 'Units', 'Normalized', 'OuterPosition', [0 0 1 1]);
% Give a name to the title bar.
set(gcf, 'Name', 'Demo by ImageAnalyst', 'NumberTitle', 'Off')
se = strel('Octagon', 3);
th = imtophat(grayImage, se);
% Display the image.
subplot(2, 2, 2);
imshow(th, []);
title('Top Hat Image', 'FontSize', fontSize);
bh = imbothat(grayImage, se);
% Display the image.
subplot(2, 2, 3);
imshow(bh, []);
title('Bottom Hat Image', 'FontSize', fontSize);
out = uint8((double(th)+double(bh))/2);
% Display the image.
subplot(2, 2, 4);
imshow(out, []);
title('Output Image', 'FontSize', fontSize);
Kev on 25 Sep 2013
Dear Image Analyst,
I've sent you a zip file containing my code and sample images. I discussed with my supervisor and he said we can build a GUI to adjust the marker and mask image parameters (when required). So, I've designed the GUI. I was wondering if you can advice me on how I can approach this. I'm looking into building basic GUI to learn. But if you look at my code, will I require to make drastic changes if I were to add GUI? Sorry for asking stupid questions. I appreciate your kind response.

Sign in to comment.

Ashish Uthama
Ashish Uthama on 14 Oct 2013
Edited: Ashish Uthama on 14 Oct 2013
How about connected component analysis? Use regionprops to obtain properties of each of the connected components (i.e areas of white surrounded by black). The 'Eccentricity' stat looks promising in differentiating 'line like' vs 'blob like'.
A quick attempt:
im = imread('/tmp/t.png');
bw = all(im,3);
Obtain all stats for the connected components
stats = regionprops(bw,'all');
% There ought to be something 'different' about the inside of the tubes.
% 'Eccentricity' seems promising from the description in the doc.
eThresh = 0.99; %higher => more 'line' like
lineStats = stats([stats.Eccentricity]>eThresh);
%%Fill up the line like regions
bwFilled = bw;
lineLocations = {lineStats.PixelIdxList};
lineLocations = cell2mat(lineLocations');
bwFilled(lineLocations) = false;
imshowpair(bw, bwFilled);
As you can see, this is not perfect. Maybe you could come up with your own stat based on the pixel list of the connected component to better identify regions 'inside' the tube. (There will always be an edge case where human intervention would be required - consider multiple parallel tubes with the spacing between them being equal to the tube thickness).

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by