Rotor Speed Control- Deloading Control for Frequency Regulation by wind turbines

Versión 1.1.0.0 (5,5 MB) por Venkatesh Yadav
DFIG operates on a non-optimal power curve @ speed=10 m/s to provide spinning reserves
4.2
(5)
2,5K descargas
Actualizado 19 oct 2015

Ver licencia

Generally, DFIG operates at maximum power points. Here 10% reserves are created through rotor speed control (overspeeding) to provide spinning reserves that can be utilized for primary frequency regulation by DFIG. The DFIG operates at lesser power coefficient of 0.9*0.48. This is done by increasing tipspeed ratio or overspeeding rotor and changing the electrical power reference from Pmax t0 0.9 Pmax. Then a frequency regulation loop will provide additional increase in active power whenever there is frequency deviation from 60 Hz

Citar como

Venkatesh Yadav (2024). Rotor Speed Control- Deloading Control for Frequency Regulation by wind turbines (https://www.mathworks.com/matlabcentral/fileexchange/49935-rotor-speed-control-deloading-control-for-frequency-regulation-by-wind-turbines), MATLAB Central File Exchange. Recuperado .

Compatibilidad con la versión de MATLAB
Se creó con R2014b
Compatible con cualquier versión
Compatibilidad con las plataformas
Windows macOS Linux
Categorías
Más información sobre Wind Power en Help Center y MATLAB Answers.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

New folder/

New folder/

Versión Publicado Notas de la versión
1.1.0.0

modified the rotor speed controller inputs and outputs. Concept of deloading is explained using figures and input data for simulation of those figures is given in notepad.
1.0.0.0