Buck Converter using inductor current control method
It steps down DC voltage from 70 V to 20 V. It measures the output voltage and compares with reference voltage. Their difference is passed to PI controller which gives current to be drawn to maintain output voltage to reference value. This calculated reference current is compared with actual inductor current. If actual inductor current is less than calculated reference current, then switchin mosfet S is turned on so that inductor current increases. If actual inductor current is greater than calculated reference current, then switchin mosfet S is turned off so that inductor current decreases. In this way, output voltage is regulated.
Citar como
Niranjan Bhujel (2024). Buck Converter using inductor current control method (https://www.mathworks.com/matlabcentral/fileexchange/62137-buck-converter-using-inductor-current-control-method), MATLAB Central File Exchange. Recuperado .
Compatibilidad con la versión de MATLAB
Compatibilidad con las plataformas
Windows macOS LinuxCategorías
Etiquetas
Comunidades de usuarios
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Descubra Live Editor
Cree scripts con código, salida y texto formateado en un documento ejecutable.