File Exchange

image thumbnail

ETL controller for volumetric imaging

version 1.0.2 (70.6 KB) by Jesus Perez
This app was made to perform volumetric imaging (3D) by controlling an electrically tunable lens (ETL).

2 Downloads

Updated 30 Sep 2020

View Version History

View License

Send a voltage signal from 0 to 5 V through a NI-DAQ for controlling an electrically tunable lens (ETL).

1. Set manually the output voltage by using a knob or a text box.
2. Add voltage values to the table.
3. Indicate the total number of frames to acquire.
4. Press start.

The program will set the output voltage with the first value on the table, then it will wait to an input signal from the imaging system (end-of-frame TTL) for changing to the next voltage value of the table, and so on. When it finish the values of the table, is started again with the first and so on.

You need a NI-DAQ to send an analog output to the ETL current amplifier and to read an end-of-frame TTL signal from the imaging system.

Cite As

Jesus Perez (2021). ETL controller for volumetric imaging (https://www.mathworks.com/matlabcentral/fileexchange/78245-etl-controller-for-volumetric-imaging), MATLAB Central File Exchange. Retrieved .

Comments and Ratings (0)

MATLAB Release Compatibility
Created with R2019b
Compatible with any release
Platform Compatibility
Windows macOS Linux

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!