Respondida
How to acces a simscape.logging.Node
I don"t have the toolbox but this should work. plot(simlog.Motor_And_Load.PMSM.Permanent_Magnet_Synchronous_Motor.angular_v...

alrededor de 1 año hace | 0

Respondida
loop not recording array
Note: Handcoded from memory. Loops are unnecessary in this case. differences = diff(raininches); avgdiff = mean(...

alrededor de 1 año hace | 0

Respondida
Generate c function from simulink subsystem
Make the subsytem that you want to create C code as "Atomic Subsystem". If you have an atomic subsystem in Simulink and you w...

alrededor de 1 año hace | 0

Respondida
how to assign values of one editfield to another editfield in masking a simulink subsystem
1. Open the Mask Editor (ctrl + M). Add the parameters in *Parameters & Dialog* Section as *edit field* types give the names for...

alrededor de 1 año hace | 0

Respondida
Opaque bus creator, do not permit to change options
Press ctrl+d (compile model) and select the appropriate signal to propagate.

alrededor de 1 año hace | 0

Respondida
Invalid block diagram name supplied
The block name has to be a valid MATLAB name. Make sure it follow the naming conventions.

alrededor de 1 año hace | 0

Respondida
How can I change SlopeAdjustmentFactor ?
You need to use Datatype Conversion block and set the Output data type to fixdt(0, 16, 1) [where 1 is the SlopeAdjustmentFactor]...

alrededor de 1 año hace | 0

| aceptada

Respondida
Why is my pv array in simulink not the update blue version?
Background is supposed to be white in color as per documentation <https://www.mathworks.com/help/sps/powersys/ref/pvarray.html *...

alrededor de 1 año hace | 0

Respondida
How to find the value of variable in the library?
Click on the subsystem and press ctrl + M and go to initialization. And make sure to check out all the callbacks of the subsy...

alrededor de 1 año hace | 0

Respondida
measuring the time between two point of signal
<</matlabcentral/answers/uploaded_files/1556087/IMG_4187.jpg>> <</matlabcentral/answers/uploaded_files/1556092/IMG_4186.JPG>>...

alrededor de 1 año hace | 0

| aceptada

Respondida
Unlock and edit Simulink toolboxes
Like your last option is the safest. I don't have the Aerospace Toolbox but if you are able to see the contents of the subsytem....

alrededor de 1 año hace | 0

Respondida
Simulink - How to exctract the exact time the derivative is different from 0?
Although it might be not what you are looking for. It definitely should help you get further. <</matlabcentral/answers/upload...

alrededor de 1 año hace | 0

Respondida
How to get Signal names directly using out.simout block in simulink?
I would rather suggest you to log the labeled signals and visualise it in *Simulink Data Inspector* which can later be exported ...

alrededor de 1 año hace | 0

Respondida
Simulink - How to extract the time when the signal is on?
So if your goal is to output a signal when the yellow signal is off. You could simply use a not logical operator <https://de....

alrededor de 1 año hace | 0

Respondida
How can I find the determinant and transpose of a 13*13 matrix without writing all the numbers one by one?
doc det doc transpose

alrededor de 1 año hace | 0

Respondida
Simulink to workspace doesn't work
Double click To workspace block. Select the "Save Format" as Array. By the way, the one you have is timeseries. You can si...

alrededor de 1 año hace | 0

| aceptada

Respondida
I have license expire problem
Like it says, contact MathWorks Support Team or your system administrator

alrededor de 1 año hace | 1

| aceptada

Respondida
The name of these symbols in Simulink
Green -> Step block Yellow -> Gain block Red -> To Workspace block Blue -> Terminator block

alrededor de 1 año hace | 0

Respondida
Attached one symbol . kindly help to find out the symbol name in simulink
Looks like there’s no any built in Simulink blocks as you show here. Perhaps contacting the author of the document is a good ide...

alrededor de 1 año hace | 0

Respondida
How to debug effectively inside MATLAB function block in Simulink?
Debugging MATLAB Function Block is the same as you would normally debug MATLAB Code. Additional advantage is that you can watch ...

alrededor de 1 año hace | 0

Respondida
Setting parameters in Signal Editor block in simulink
<https://www.mathworks.com/help/simulink/ug/import-custom-file-type.html>

alrededor de 1 año hace | 0

| aceptada

Respondida
How can I show values of a library block parameters?
you can use MATLABFucntion block and use get_param(gcb, "Fully_charge_voltage") to get the value of the masked parameter. Assumi...

alrededor de 1 año hace | 0

Respondida
Turning voltage on/off in a PV Array and DC motor simulation
Use <https://www.mathworks.com/help/sps/powersys/ref/igbt.html *IGBT*> instead of the block that you show in the picture. You ca...

alrededor de 1 año hace | 0

Respondida
For iterator subsystem output cannot hold one sample time
The picture doesn't show the x axis ticks. The input signal values are not shown to us. It is important to note that the signal ...

alrededor de 1 año hace | 0

Respondida
How to use a Simulink.Signal object to generate code?
Make sure that the signal resolves to Simulink Object. If it still causes problem , provide a screenshot of how the signal is be...

alrededor de 1 año hace | 0

Respondida
How do I switch on and off my voltage source to charge batteryes based off of my current state of charge?
I don"T have Simscape License. But the logic can be implemented. Feed the SOC signal to the switch <https://www.mathworks.co...

alrededor de 1 año hace | 0

| aceptada

Respondida
F28379d Communication Protocol Error
Seems like a similar issue from <https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcon...

alrededor de 1 año hace | 0

Respondida
i want to develope DC to DC converter that contain diode, inductor, mosfet etc so can i develope these blocks using basic simulink library instead of simscape?
Yes, you can. See the link ( <https://www.mathworks.com/help/sps/power-converters.html *Power Converters*> ) for different types...

alrededor de 1 año hace | 0

Respondida
I am trying to run the following example but encountered an error.
See the link to simulate the model in accelerator mode <https://www.mathworks.com/help/sldo/ug/accelerating-model-simulations-du...

alrededor de 1 año hace | 0

Respondida
Export Symbols attributes in Stateflow
You can turn on the option to display the attributes by default and by doing this it’s always easier for others to understand wh...

alrededor de 1 año hace | 1