Respondida
Update of TS data?
What is the status code you get from ThingSpeak when you update your channel? If you are using the Write Data API and get a HTTP...
Update of TS data?
What is the status code you get from ThingSpeak when you update your channel? If you are using the Write Data API and get a HTTP...
más de 5 años hace | 0
| aceptada
Enviada
Model-Based Design of a SUV Anti-Rollover Control System
Models and literature demonstrating Model Based Design of a SUV Anti-Rollover Control System.
más de 5 años hace | 1 descarga |
Respondida
Problem sending GPS Data from TTGO T-Call (ESP32) board to Thingspeak using integrated SIM800L.
Try to strip down the example to the minimum to find the source of your issue. Since this is a build issue, I suspect your toolc...
Problem sending GPS Data from TTGO T-Call (ESP32) board to Thingspeak using integrated SIM800L.
Try to strip down the example to the minimum to find the source of your issue. Since this is a build issue, I suspect your toolc...
más de 5 años hace | 0
Respondida
Arduino built in example "WriteMultipleFields" gets error code -301
Have you made sure you're using the latest version of the library? Are you unable to see channel updates with the examples that ...
Arduino built in example "WriteMultipleFields" gets error code -301
Have you made sure you're using the latest version of the library? Are you unable to see channel updates with the examples that ...
más de 5 años hace | 0
Respondida
How do I get ThingSpeak (Channel ID: 1077109) to update the ThingSpeak page automatically every 2 minutes.
The MATLAB visualization will update if you reload the page or visit it again every 5 minutes.
How do I get ThingSpeak (Channel ID: 1077109) to update the ThingSpeak page automatically every 2 minutes.
The MATLAB visualization will update if you reload the page or visit it again every 5 minutes.
más de 5 años hace | 0
Respondida
Send GPIO Status to Thingspeak (Lamp Indicator Widget)
Take a look at this example. You can modify it to show your pump status instead of CPU percent utilization quite easily.
Send GPIO Status to Thingspeak (Lamp Indicator Widget)
Take a look at this example. You can modify it to show your pump status instead of CPU percent utilization quite easily.
más de 5 años hace | 0
Respondida
Update channels with Arduino MKR NB 1500 or Dfrobot SIM7600CE-T 4G(LTE) Shield
I'm guessing you're using AT commands to send the data to ThingSpeak. It is likely you will need to modify the AT commands from ...
Update channels with Arduino MKR NB 1500 or Dfrobot SIM7600CE-T 4G(LTE) Shield
I'm guessing you're using AT commands to send the data to ThingSpeak. It is likely you will need to modify the AT commands from ...
más de 5 años hace | 0
Respondida
Thingspeak Server Uptime and Lost Data
The ThingSpeak team has a very high standard for uptime for API servers. Our releases are planned keeping in mind having zero do...
Thingspeak Server Uptime and Lost Data
The ThingSpeak team has a very high standard for uptime for API servers. Our releases are planned keeping in mind having zero do...
más de 5 años hace | 0
Respondida
Number of Fields in a Thingspeak Channel
Try going to the Channel's "Settings" tab and enabling the fields. You may not have enabled the fields on the channel, or may ha...
Number of Fields in a Thingspeak Channel
Try going to the Channel's "Settings" tab and enabling the fields. You may not have enabled the fields on the channel, or may ha...
más de 5 años hace | 1
Respondida
Matlab Analysis won't update my field!
If you want a plot of your values, you need to use a MATLAB visualization and add the output to the view of your channel.
Matlab Analysis won't update my field!
If you want a plot of your values, you need to use a MATLAB visualization and add the output to the view of your channel.
más de 5 años hace | 0
Respondida
Trend lines and forcasts
Certainly possible to use MATLAB and fit a curve through the data points and project the curve into the future to see where it m...
Trend lines and forcasts
Certainly possible to use MATLAB and fit a curve through the data points and project the curve into the future to see where it m...
más de 5 años hace | 1
Respondida
Location data along fields vs channel settings
The lat-lon of the channel is where the channel is located. The lat-lon of the feed is where the actual feed was measured. To ...
Location data along fields vs channel settings
The lat-lon of the channel is where the channel is located. The lat-lon of the feed is where the actual feed was measured. To ...
más de 5 años hace | 1
| aceptada
Respondida
Data sent to ThingSpeak only twice
My guess is the RTC is interrupting the network stack during the transmission of data to ThingSpeak. Maybe eliminate the RTC int...
Data sent to ThingSpeak only twice
My guess is the RTC is interrupting the network stack during the transmission of data to ThingSpeak. Maybe eliminate the RTC int...
más de 5 años hace | 2
Respondida
Widget name with spaces or other special characters
A fix for this has been deployed. Please let us know if you are still seeing spaces being replaced by %20, or other special char...
Widget name with spaces or other special characters
A fix for this has been deployed. Please let us know if you are still seeing spaces being replaced by %20, or other special char...
más de 5 años hace | 0
| aceptada
Respondida
MATLAB Analysis Code window does not allow editing in Firefox 77.0.1
I just tried Firefox 77.0.1 and I don't have this problem. I suspect it is one of your plugins/extensions that is interfering wi...
MATLAB Analysis Code window does not allow editing in Firefox 77.0.1
I just tried Firefox 77.0.1 and I don't have this problem. I suspect it is one of your plugins/extensions that is interfering wi...
más de 5 años hace | 0
Respondida
From Google Sheets to ThingSpeak
You can set up a MATLAB analysis code to use this function to read data from your google sheet. Once you have the data in your M...
From Google Sheets to ThingSpeak
You can set up a MATLAB analysis code to use this function to read data from your google sheet. Once you have the data in your M...
más de 5 años hace | 2
| aceptada
Respondida
ThingSpeak Pushing Messages?
If you want SMS messages to your phone, it is easily possible. 1) Use ThingHTTP to send an email alert to yourself. 2) In yo...
ThingSpeak Pushing Messages?
If you want SMS messages to your phone, it is easily possible. 1) Use ThingHTTP to send an email alert to yourself. 2) In yo...
más de 5 años hace | 0
Respondida
How to create an editable map on thingspeak?
If you have a paid license of ThingSpeak, you can enable the "Auto Update" checkbox on the MATLAB visualization that will cause ...
How to create an editable map on thingspeak?
If you have a paid license of ThingSpeak, you can enable the "Auto Update" checkbox on the MATLAB visualization that will cause ...
más de 5 años hace | 1
| aceptada
Respondida
Getting sporadic 404 Bad request and 429 Too Many Requests when posting bulk data
This is most likely with a badly constructed request to ThingSpeak. It will be difficult to debug because it is likely that some...
Getting sporadic 404 Bad request and 429 Too Many Requests when posting bulk data
This is most likely with a badly constructed request to ThingSpeak. It will be difficult to debug because it is likely that some...
más de 5 años hace | 0
| aceptada
Respondida
Sending an Email to someone else using Thingspeak
ThingSpeak only sends email to the account owner, to prevent it from being used to spam people. You can set up a rule in your em...
Sending an Email to someone else using Thingspeak
ThingSpeak only sends email to the account owner, to prevent it from being used to spam people. You can set up a rule in your em...
más de 5 años hace | 0
Respondida
how to enable email notification once a month or after 30 days.
Have you taken a look at the TimeControl app on ThingSpeak? You can use that to schedule your MATLAB code to run on a schedule o...
how to enable email notification once a month or after 30 days.
Have you taken a look at the TimeControl app on ThingSpeak? You can use that to schedule your MATLAB code to run on a schedule o...
más de 5 años hace | 0
| aceptada
Respondida
ThingSpeak error responses broken?
We are looking into this. I'll post a response here when we have more information.
ThingSpeak error responses broken?
We are looking into this. I'll post a response here when we have more information.
más de 5 años hace | 0
Respondida
ESP32 - Arduino - no data seen on Thingspeak
I'd recommend starting with the examples here. They will provide a good foundation as you develop your specific sketch.
ESP32 - Arduino - no data seen on Thingspeak
I'd recommend starting with the examples here. They will provide a good foundation as you develop your specific sketch.
más de 5 años hace | 0
Respondida
MQTT subscribe gets no data back
Have you taken a look at this example? It should be possible to modify it for a Particle Argon quite easily.
MQTT subscribe gets no data back
Have you taken a look at this example? It should be possible to modify it for a Particle Argon quite easily.
más de 5 años hace | 0
Respondida
ThingSpeak account not accepting messages after anniversary date
Have you tried sending messages from a browser window to rule out a code issue?
ThingSpeak account not accepting messages after anniversary date
Have you tried sending messages from a browser window to rule out a code issue?
más de 5 años hace | 1
| aceptada
Respondida
Can't export data from thingspeak. Thingspeak takes too long to respond.
We're able to reproduce this and are working on a fix. I'll update this thread once the fix is deployed.
Can't export data from thingspeak. Thingspeak takes too long to respond.
We're able to reproduce this and are working on a fix. I'll update this thread once the fix is deployed.
más de 5 años hace | 0
| aceptada
Respondida
Random appearance of error code 400
A 400 response is in response to a bad request. This usually can be traced back to a request that likely has badly encoded data....
Random appearance of error code 400
A 400 response is in response to a bad request. This usually can be traced back to a request that likely has badly encoded data....
más de 5 años hace | 0
Respondida
Thingspeak - upload stopped working on all channels simultaneously
I think this has to do with your device connectivity or something on that end. To confirm, can you try logging in to ThingSpea...
Thingspeak - upload stopped working on all channels simultaneously
I think this has to do with your device connectivity or something on that end. To confirm, can you try logging in to ThingSpea...
más de 5 años hace | 1
| aceptada
Respondida
How do i send multiple emails to different people using the Thingspeak Matlab Analysis
The alerts feature is designed to only send emails to the ThingSpeak accout holder. This is to prevent abuse of the service to g...
How do i send multiple emails to different people using the Thingspeak Matlab Analysis
The alerts feature is designed to only send emails to the ThingSpeak accout holder. This is to prevent abuse of the service to g...
más de 5 años hace | 0
Respondida
Thingspeak - Expired License message & upload stopped working
I suspect you missed the deadline to link your legacy ThingSpeak account to a MathWorks Account. The issue is the same as report...
Thingspeak - Expired License message & upload stopped working
I suspect you missed the deadline to link your legacy ThingSpeak account to a MathWorks Account. The issue is the same as report...
más de 5 años hace | 1