Respondida
Simulink Real Time Speedgoat and App Generator
Hi Daniel, You can insert a "Target Selector" UI component to your App Designer interface to select the target machine you'd li...

más de 1 año hace | 1

| aceptada

Respondida
How do I send serial commands to a device with Simulink Real Time?
Hi Dan, What kind of cable are you using to test this loopback model? Please note that a null-modem cable (or adaptor) must be ...

más de 1 año hace | 0

Respondida
How do i save a file into a folder in a different path?
Hi Rachel, That should be fairly straightforward. You can create: a new directory each iteration of the 'for' loop, and save y...

más de 1 año hace | 1

Respondida
How to export trained RL agent to TwinCat machine learning inference
Hi Chetan, In case you'd like to deploy your algorithm on a real-time target machine that specifically uses Simulink Real-Time ...

más de 1 año hace | 0

| aceptada

Respondida
Delete application on target computer programmatically
Hi Matteo, The function "removeApplication" was introduced for that purpose in MATLAB R2022a. Furthermore, the function "remove...

más de 1 año hace | 0

| aceptada

Respondida
Why I can not save all the simulation data using to workspace in simulink's external mode?
Hello Amina, I do not recommend using the "To Workspace" block to log data in Simulink Real-Time. If you're using MATLAB R2020a...

más de 1 año hace | 0

Respondida
Variable Length Windows Real-Time Target UDP Receive Block
Hi Arne, That should be possible in my opinion. I would define the maximum expected size in your UDP receive block, and then di...

más de 1 año hace | 0

Respondida
If development computer is target computer, how can I built the connection?
Hi Wilson, You must have two separate devices to use Simulink Real-Time: one host/development PC, and one target machine. Best...

más de 1 año hace | 0

Respondida
Can I connect Simulink Version 2022a to a Non-Speedgoat Target Machine?
Hi Kyle, I'm afraid that's not possible: only Speedgoat target machines are supported by Simulink Real-Time since R2018a. Kind...

más de 1 año hace | 1

| aceptada

Respondida
Get 1st element/reading from a Real-time encoder readings
Hi Ahmet, How about using a block-based approach instead? You could for example go for something similar to this: In this ...

más de 1 año hace | 0

| aceptada

Respondida
C Caller Block with Simulik Real time R2022b
Hi Daniel, Have you checked these suggestions when updating to R2020b and later? There's a number of differences in Simulink Re...

más de 1 año hace | 0

Respondida
speedgoat target coputer 1
Hi William, Speedgoat target machines are expressly designed to work with Simulink Real-Time. Similarly, only Speedgoat hardwar...

más de 1 año hace | 0

Respondida
Event triggered update of simulink.parameter in model deployed to target (Speedgoat) to signal within model
Hi Derry, I would recommend modelling that behaviour, i.e., working with signal values rather than parameters. In the scenario ...

más de 1 año hace | 1

| aceptada

Respondida
Simulink Realtime Add-on on Ubuntu 20.04
Hi Ehtisham, I suggest having a look at the following MATLAB Answers posts: https://www.mathworks.com/matlabcentral/answers/48...

más de 1 año hace | 0

Respondida
Matlab 2020b and above no more target than speedgoat possible?
Hi Jan, That's correct: support for custom target hardware has actually already been removed from Simulink Real-Time in R2018a....

más de 1 año hace | 0

Respondida
How can I get analog input data to Speedgoat target machine I/O?
Hi Eric, The IO334-325k is a Simulink-programmable FPGA, meaning that you'll have to use HDL Coder to synthesise your own bitst...

más de 1 año hace | 0

| aceptada

Respondida
How to stream vector (1X5) data from Target device to App designer?
Hi Jesica, I think there are several mistakes here: The correct syntax of the function is connectScalar (lowercase "c" and "a"...

más de 1 año hace | 1

Respondida
How to reset a received CAN receive or unpack block
Hi Felix, Absolutely, you can use the "Timestamp" output port of the CAN Unpack block to check when the last message with this ...

más de 1 año hace | 0

Respondida
Is it possible to generate a PWM signal in a real-time model with a pulse width resolution smaller than the fixed time step of the model?
Hi Findlay, Absolutely, this is possible, though you would probably not use the CPU of your target machine for this purpose. If...

más de 1 año hace | 2

| aceptada

Respondida
How can i get the Task Execution Time of a simulink model in Execution Profiling for Real-Time Applications
Hi Liqun, In the figure you posted, the task execution time (TET) is represented by the length of each green bar. Besides the p...

más de 1 año hace | 0

Respondida
Is there any Simulink block can parse and generate code for LIN Description Files?
Hi Alon, In case you're using Simulink Real-Time, "LIN Pack" and "LIN Unpack" blocks have been introduced for this purpose in M...

más de 1 año hace | 0

Respondida
Can "Data frame Sizes" be changed longer than 8? Can "Length" be changed longer than 32?
Hi Byeongsoo, The maximum length of a CAN message is by definition 64 bits / 8 bytes. If your message contains more data, you'r...

más de 1 año hace | 1

Respondida
How is the CAN Pack block from Simulink Real Time triggered to send remote frames?
Hi Remi, This might be due to the driver blocks for the I/O hardware you're using to send the remote CAN frame. In case you're ...

más de 1 año hace | 0

Respondida
Multiple messages have to be transferred by CAN Pack/Unpack
Hi Saeed, As far as I know, you should use one CAN Pack/Unpack block per CAN Message ID. I hope this is helpful! Dimitri

más de 1 año hace | 0

Respondida
xPC Target and B&R PowerLink (Real-Time Ethernet)
Hi Igor, I belive you would need a specific module for that. Speedgoat offers dedicated POWERLINK I/O interfaces for this purpo...

más de 1 año hace | 0

Respondida
does the RTWT supports CANopen?
Hi Amir, I am not sure about the Simulink Desktop Real-Time toolbox, but there are definitely options to communicate over CANop...

más de 1 año hace | 0

Respondida
What is the correct way to read Simulink Real Time data from the Speedgoat IO504 read block?
Hi Wiley, Speedgoat recently introduced product examples in their latest Speedgoat I/O Blockset release (v9.4.1), including an ...

más de 1 año hace | 0

Respondida
Wrong number of input arguments passed to S-Function
Hi Alessio, Could you please try installing the latest Speedgoat I/O Blockset version for your MATLAB Release, and see if it so...

más de 1 año hace | 0

Respondida
Technical support and model request for Speedgoat's Baseline Real-Time Target Machines
Hi Xueying, It's hard to say for sure based only on the information that you shared, but the time-drifting that you observed ma...

más de 1 año hace | 0

| aceptada

Respondida
Has anyone used a speedgoat with sensors and actuators to test a SIMULINK-designed flight controller as a RCP/HIL?
Hi Jesus, You can find several success stories here showing projects in which Speedgoat real-time target machines and Simulink ...

más de 1 año hace | 0

Cargar más