Community Profile

photo

Jerome Blair


Last seen: 11 meses hace |  Con actividad desde 2020

Followers: 0   Following: 0

Contacto

50+ years in software development. PhD in Applied Mathematics. IEEE Fellow.

Estadísticas

  • First Review
  • First Answer

Ver insignias

Feeds

Ver por

Respondida
SNR function returns low values
The noise power is not the level of the level of theh noise on the spectrum analyzer--it is the sum of the energies at all exclu...

casi 2 años hace | 0

Respondida
Matlab R2015b snr output doesn't shows anything
You have a semicolon after the command. That tells MATLAB to not show teh answere.

casi 2 años hace | 0

Respondida
Get fitting statistics from "solve"
Of course p1 will not be able to access them. You have to acces them with p2 or p3--the handle that was used when theeh line was...

alrededor de 4 años hace | 0

Respondida
Get fitting statistics from "solve"
p1 can only reference 1 line. Additional lines must use p2, p3, etc., as in the example I sent. The different hanles, p1, p2, ...

alrededor de 4 años hace | 0

Respondida
Get fitting statistics from "solve"
You do all the plots once as follows: p1 = plot(x1,y1,color1); hold on p2 = plot(x2,y2,color2); etc. Now set the y limits s...

alrededor de 4 años hace | 0

Respondida
Fourier Transform of a Radar Signal
You should be plotting abs(ff), not abs(real(ff)). The spectrum of this signal is not a single line at 3kHz. It should be a b...

alrededor de 4 años hace | 1