Respondida
How to simulate code in symbolic form?
Here is one way, though it cannot solve it at one point I think so throws an error when asked to display the solution % assume ...

alrededor de 1 mes hace | 0

Respondida
delete zero in signal
Your question is a bit ambigious but if you just want to remove the 0 s from the signal you can use a switch and delay block to ...

alrededor de 1 mes hace | 0

Respondida
Unknown variables appearing in solutions for symbolic equation solver
This is shown in the documentation of solve, under Solve Polynomial Equations of High Degree. You should call the function wit...

alrededor de 1 mes hace | 0

Respondida
What is MATLAB doing when adding multiple ZPK transfer functions together?
Yes but you are doing a fractional algebra. To refresh your memory: a/b + c/d = (a*d + c*b)/(b*d) Since numerator stays b*d, ...

alrededor de 1 mes hace | 0

Respondida
Want to programmatically get the Maltlab status of (ready, busy), etc., in the bottom left corner of the window. What procedure will be used?
I recommend you use waitbar() function as an indicator of the progress within the code. f = waitbar(0,'Program started...'); %...

alrededor de 1 mes hace | 0

Respondida
How to save a output matrix in each iteration?
Here is one way, where M_total_P is a 2x2x901 matrix, where 901 is the number of frequencies you have in the code. clc clear ...

alrededor de 1 mes hace | 0

Respondida
I am getting this warning "Matrix is singular to working precision." and my surf plot is not showing.
You are doing a matrix mutiplication when you call the u() function, since you call u function with matrix arguments X and Y. Th...

alrededor de 1 mes hace | 1

Respondida
Gain dimension failure ending in error
G gain is set for element wise multiplication instead of matrix multiplication, hence (1,4).*(4,1) = (4,4). x = ones(4,1); G =...

alrededor de 1 mes hace | 0

| aceptada

Respondida
change the color of curve from blue to any color and make it bold
x= 0:0.01:2*pi; y = sin(x); plot(x,y,'r') % r stands for red look at the documentation for different colors

alrededor de 1 mes hace | 0

| aceptada

Respondida
Hi, why am I getting an error?
You provide a fitlm model to plot function and a color option. Remove the color option and try again. So change % plot(F_sept...

alrededor de 1 mes hace | 1

| aceptada

Respondida
Unrecognized function or variable 'del'.
Not recommended but you can generally overwrite native variable/function names. I cannot reproduce your problem n = 0; for del...

alrededor de 1 mes hace | 0

Respondida
How to make the encircled curve by blue.
You have one weird data and script to visualize but here is one way clear all warning off % you had references to F:/ folder ...

alrededor de 2 meses hace | 0

| aceptada

Respondida
How to vary angles at constant rate in a kinematics problem?
For loops are easy to understand but as mentioned in comments, once you understand the logic you should vectorize it. The basic ...

alrededor de 2 meses hace | 0

| aceptada

Respondida
how to get the name of current running m script
mfilename() function seems to be what you are looking for.

2 meses hace | 0

| aceptada

Resuelto

Mysterious digits operation (easy)
What is this digit operation? 0 -> 0 1 -> 9 121 -> 9 44 -> 6 15 -> 5 1243 -> 7 ...

2 meses hace

Resuelto

Finding Perfect Squares
Given a vector of numbers, return true if one of the numbers is a square of one of the numbers. Otherwise return false. Example...

3 meses hace

Resuelto

Return area of square
Side of square=input=a Area=output=b

3 meses hace

Resuelto

Maximum value in a matrix
Find the maximum value in the given matrix. For example, if A = [1 2 3; 4 7 8; 0 9 1]; then the answer is 9.

3 meses hace

Respondida
Class property validator reports an error if no default value is set
You can write your own validation function classdef MyClass properties hWriteFunc(1,1) {mustBeFunctionHandle} = @...

3 meses hace | 2

Respondida
contour diagram with three vectors
Here is one way: x = linspace(0,4,10); % x coordinate y = linspace(0,8,10); %^y coordinate [X,Y] = meshgrid(x,y); % meshgri...

3 meses hace | 0

| aceptada

Respondida
Reset value of Ramp block to be used in Matlab Fctn block
Seems like this was a homework problem :D Take a look here:

3 meses hace | 0

Respondida
Ramp block having reset option
Here is one way with enabled subsystem, where the subsystem comes up with an offset (so if the ramp number gets too large it mig...

3 meses hace | 0

Respondida
Constant estimation from 2 noisy measurements
@Viktor Cockx, A bit late but here is an example for a mass spring damper system, where I am trying to estimate the mass, spring...

3 meses hace | 0

Resuelto

Project Euler: Problem 1, Multiples of 3 and 5
If we list all the natural numbers below 10 that are multiples of 3 or 5, we get 3, 5, 6 and 9. The sum of these multiples is 23...

3 meses hace

Respondida
What does this section mean?
Probably the integral reset functionality. So when you disable and enable the controller, the integral term will reset to 0 to p...

3 meses hace | 3

| aceptada

Respondida
Creating a block for a term like (4s+1) in simulink?
I suggest you try to understand why 4*s+1 cannot be simulated. Although there are workarounds. hint: what does s do to a time do...

3 meses hace | 0

| aceptada

Respondida
Find a value using an index obtained from a different matrix with same dimensions
Something like this maybe: %% your matrices val = load('Total_matrix_cases.txt'); x = load('Total_matrix_rotations.txt'); ...

3 meses hace | 1

| aceptada

Respondida
Higher order Hungarian algorithm?
Somthing like this maybe; a=[ 4 5 2]; b=[-8 -13 3]; c=[ 4 7 -9 11]; thresholdValue = 2; [A,B,C] = meshgrid(a,b,c);...

3 meses hace | 0

Respondida
Ive completed code for an assignment but receive strange answers any help?
You are getting NaN because your s1 is equal to s2: s1=-wnN*zetaN-wdN*i s2=-wnN*zetaN-wdN*i where you forgot the ...+wdN*i fo...

3 meses hace | 0

| aceptada

Respondida
How to create this equation in simulink?
you can use 'delay' block to make the u(t) = u(t-1) part of the equation. you can use another 'delay' block to make the e(t) = ...

3 meses hace | 0