Respondida
fsk modulator and demodulator
Walter is right - when you add noise(3) to the signal you are not actually adding random noise, you're just adding some positive...

casi 15 años hace | 1

| aceptada

Respondida
Inoperability between Mac (Intel) and Windows
'filt' is the name of a function in the Control System Toolbox: >> doc filt Perhaps the Mac does not have Control System...

casi 15 años hace | 2

| aceptada

Respondida
Why do I get the errors "Missing operator, comma, or semicolon" and "eval(['dbstop in ' mfile ' at ' num2str(line_num)])"?
If you look at the submission's page on the File Exchange, the author says this: "Note for users who get stuck by the IMVIEW ...

casi 15 años hace | 0

Respondida
How to get the coefficients from FDA Tool block (Simulink) using Matlab Command?
If you right-click on the Digital Filter Design block (FDATool block) and 'Look Under Mask', you will see that the block contain...

casi 15 años hace | 0

| aceptada

Respondida
Butterworth Notch Filters
For higher order filters (possibly starting as low as order 8), numerical problems due to roundoff errors may occur when forming...

casi 15 años hace | 3

| aceptada

Respondida
Plot two graphs in one scope
You could use <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/ug/bq_5wvg-1.html Model Referencing> to include th...

casi 15 años hace | 0

Respondida
Getting undefined model variables
You could place something like this in the InitFcn callback of your model: if ~exist('a', 'var') % If 'a' is not initialize...

casi 15 años hace | 0

Respondida
Guitar SImulation
The Signal Processing Toolbox has a nice demo that shows how to use filters to create guitar chords. To bring up the GUI, type:...

casi 15 años hace | 0

| aceptada

Respondida
High pass butterworth filter
You are converting the cutoff frequency to radians while leaving the Nyquist rate in Hz. Try this: fc=0.1;% cut off freq...

casi 15 años hace | 0

Respondida
What exactly is the 'Sample time' (Ts) and 'Samples per frame' variables in the Bernoulli bit generator?
If the output of the Bernoulli Binary Generator block is set to sample-based, then 'Ts' is the amount of time between consecutiv...

casi 15 años hace | 2

| aceptada

Respondida
time interval between fft1 and fft2
When you say "time difference", do you mean the difference in execution time between the two routines? tic B=ampl_fft(A)...

casi 15 años hace | 0

| aceptada

Respondida
Simulink Embedded MATLAB Function
When you call FSOLVE from Embedded MATLAB it is called as an extrinsic function, meaning the return type is an mxArray. To use ...

casi 15 años hace | 0

| aceptada

Respondida
How to use 'set_param' command for Sample Time parameter in Bernoulli Binary Generator?
The correct parameter name is 'Ts'. You can view a list of the block's parameters like this: get_param([my_model '/Berno...

casi 15 años hace | 0

| aceptada

Respondida
array assignment question
So you just want to flip the horizontal orientation of b before you insert it into the same location in a? a(topRow:topRow+...

casi 15 años hace | 1

Respondida
Problem with matrix manipulation
You can use the <http://www.mathworks.com/access/helpdesk/help/techdoc/ref/size.html SIZE> function to check how many rows are i...

casi 15 años hace | 0

| aceptada

Respondida
fprintf function
Try opening your text file like this: object = fopen('file.txt', 'w'); This will specify that the file object is to be used ...

casi 15 años hace | 0

Respondida
Simulink time samples
Is there a reason that you couldn't use a fixed-step solver (with step size 0.001s) instead of a variable-step solver? That way...

casi 15 años hace | 1

Respondida
Halfband and FIR filter for decimation
First of all, REMEZ is an obsolete function for designing an equiripple FIR filter. You should use <http://www.mathworks.com/ac...

casi 15 años hace | 0

Respondida
Implementing QPSK modulation and Demodulation
The Bernoulli generator block is only going to generate a square wave with a value of 0 or 1. This explains why you are only se...

alrededor de 15 años hace | 0

| aceptada

Respondida
M-FSK Modulator Passband
The M-FSK Modulator Passband block hasn't been around since R14 - check out the <http://www.mathworks.com/access/helpdesk/help/t...

alrededor de 15 años hace | 1

| aceptada

Respondida
Is there a way to abort Simulink simulation programatically if it takes a long time?
Walter is correct about using a timer object that is configured to fire at the end of the wait period. In the timer callback yo...

alrededor de 15 años hace | 2

| aceptada

Respondida
Help splitting a matrix based on a specified column.
Try this: B=A(A(:,3) == 0, :) C=A(A(:,3) ~= 0, :)

alrededor de 15 años hace | 5

Pregunta


How can I identify all the changes to the configuration set between two different versions of Simulink?
I would like to know what changes have been made to the configuration set in Simulink between the version I am on and the most r...

alrededor de 15 años hace | 1 respuesta | 1

1

respuesta

Respondida
Has the algorithm for fdesign changed in Signal Processing Toolbox 6.13 (R2010a) as compared to the previous versions?
This is expected behavior. The filter designed in R2007b does not match the passband specifications very well. In Signal Proce...

alrededor de 15 años hace | 0

| aceptada

Pregunta


Has the algorithm for fdesign changed in Signal Processing Toolbox 6.13 (R2010a) as compared to the previous versions?
I am using fdesign.decimator to design an equiripple filter with given specifications. I have recently upgraded from R2007b to R...

alrededor de 15 años hace | 1 respuesta | 0

1

respuesta