Respondida
Build a jet pump model in Simscape's thermal liquid domain.
ssc-file working now, we had a negative term in sqrt before, so initialisation would fail, no matter there is no flow reversal (...

alrededor de 9 años hace | 0

| aceptada

Pregunta

Build a jet pump model in Simscape's thermal liquid domain.
Hello everyone, we are currently working with the thermal liquid domain in Simscape and try to implement a model of a jet pum...

alrededor de 9 años hace | 4 respuestas | 0

4

respuestas

Enviada

Build a jet pump model in Simscape's thermal liquid domain - files
Port the jet pump model from SimHydraulics to Simscape's thermal liquid foundation domain

alrededor de 9 años hace | 2 descargas |

Resuelto

Counting pulses in a signal
Count the number of pulses that are the result of summing each pulse generator block. Pulse Generator blocks produce a recurr...

alrededor de 9 años hace

Resuelto

Add offset to a signal
Produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/add-offset-eqn.png>> You should see a downward...

alrededor de 9 años hace

Resuelto

Produce a sine wave
Produce a sine wave with amplitude 3: <<http://blogs.mathworks.com/images/seth/cody/sine-eqn.png>>

alrededor de 9 años hace

Resuelto

Add a block to a model
Produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/add-block-eqn.png>> In this case, the slope of...

alrededor de 9 años hace

Resuelto

Produce a cosine wave
Produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/cosine-eqn.png>>

alrededor de 9 años hace

Resuelto

Connect blocks in a model
Connect the blocks in the model to produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/connect-blocks...

alrededor de 9 años hace

Respondida
Pneumatic/Hydraulic/Thermal Liquid domain - flow discharge coefficient vs. flow coefficient
Suggestion for thermal liquid domain: The local restriction block contains delta_p == mdot_A_square / (Cd^2 * 2 * restri...

alrededor de 9 años hace | 0

| aceptada

Pregunta

Pneumatic/Hydraulic/Thermal Liquid domain - flow discharge coefficient vs. flow coefficient
Hi everyone, we are using thermal liquid, hydraulic and pneumatic domain a lot, but face problems with the flow discharge coe...

más de 9 años hace | 1 respuesta | 0

1

respuesta

Pregunta

[Simscape] Are there ways to build segmented/discretised models with n as a block/mask parameter
Hello everyone, we are working a lot with Simscape's thermal liquid domain and pipe models. Often, we discretise pipes in 5 to...

más de 9 años hace | 1 respuesta | 0

1

respuesta

Respondida
[Simscape] Why does the thermal liquid pipe calculate incorrect temperatures?
Btw: the shape factor seems to have nearly no effect on heat transfer, which is quite strange. Imagine two pipe segments with...

más de 9 años hace | 0

Respondida
[Simscape] Why does the thermal liquid pipe calculate incorrect temperatures?
I'll put the support answer here: _"The temperature of the port A of the block “Pipe (TL)2” is indeed rigidly specified by ...

casi 11 años hace | 0

Pregunta

Temperature distribution in pipes using simscape
Hello, I currently try to model a large pipe buried in the ground and have to deliver step responses for temperature steps an...

casi 11 años hace | 0 respuestas | 0

0

respuestas

Pregunta

Thermal liquid data source
Hello everyone, does anybody know a good way to implement media data for the "thermal liquid settings"-block in simscape? Ar...

alrededor de 11 años hace | 0 respuestas | 0

0

respuestas

Pregunta

Is it possible to give a subsystem different outline colors (foreground color different for each port)
Hello everyone, I just wanted to know, whether it is possible to give a subsystem different outline colors. I know I can change...

alrededor de 11 años hace | 0 respuestas | 0

0

respuestas

Pregunta

[Simscape] Why does the thermal liquid pipe calculate incorrect temperatures?
Hello everyone, I am currently trying to build a heat exchanger with the standard elements from the thermal and thermal liqui...

alrededor de 11 años hace | 2 respuestas | 0

2

respuestas

Respondida
Dynamic mask dialogues - change parameters of more than one subsystem
Ok, found the answer and the trick is quite simple: thinking ;) What about using a variable to save the first correct block p...

alrededor de 11 años hace | 0

| aceptada

Pregunta

Dynamic mask dialogues - change parameters of more than one subsystem
Hello everybody, I'm currently using callbacks in parameter masks to switch block choice for configurable Subsystems. So I h...

alrededor de 11 años hace | 1 respuesta | 0

1

respuesta

Respondida
Variant control for variant subsystems with mask parameters?
I think a good description can be found here: http://blogs.mathworks.com/seth/2008/08/13/dynamic-mask-dialogs/

alrededor de 11 años hace | 0

| aceptada

Pregunta

Variant control for variant subsystems with mask parameters?
Hello everybody, I'm currently working a lot with referenced and variant subsystems and I'm wondering whether you could set t...

más de 11 años hace | 2 respuestas | 1

2

respuestas

Pregunta

Dynamic / animated xy graph in simulink possible?
Hello everybody, I have a wall model, where I try to visualize the temperature between the layers. Therefore I intend some k...

más de 11 años hace | 0 respuestas | 0

0

respuestas

Respondida
Erroneous feedback connection involving one or more virtual blocks
Ok, my solution was to put gain-blocks (with factor 1) between every bus-signal and to rename the signal afterwards. Example:...

más de 11 años hace | 2

Respondida
Erroneous feedback connection involving one or more virtual blocks
I even get this error while using 2012b, 2013a and 2013b beta. The model worked in 2012a and I don't know what happened. So ...

más de 11 años hace | 0

Respondida
Is it possible to freely change postions of inputs and outputs of simulink blocks?
Maybe we'll see that in future distributions? Is it the same thing with simscape and related products?

más de 12 años hace | 0

Pregunta

Is it possible to freely change postions of inputs and outputs of simulink blocks?
Hello, I am just wondering, if there is any possiblity to change the positions of inputs and outputs of simulink blocks. I.e....

más de 12 años hace | 3 respuestas | 2

3

respuestas

Respondida
simulink - cascade of (basic cell) blocks
No ideas by anyone?

más de 13 años hace | 0

Respondida
simulink - cascade of (basic cell) blocks
Could the "for each subsystem"-block be a solution? I've currently never worked with that...

más de 13 años hace | 0

Respondida
simulink - cascade of (basic cell) blocks
I have a similar question, since I want to build a NTU heat exchanger, where I can dynamically change the number of units (each ...

más de 13 años hace | 0