Respondida
Force install Matlab 2013a 32bit in Windows8 64bit
<http://www.mathworks.com/matlabcentral/answers/106138-is-it-possible-to-install-both-32-bit-and-64-bit-versions-of-matlab-on-64...

alrededor de 12 años hace | 0

Respondida
Differences in simulation results in state space models using matlab
You are using continuous SS coefficients while you are (discrete) simulating your system in: % Perform the system simulatio...

alrededor de 12 años hace | 0

| aceptada

Respondida
Output saving as a pdf
You may do this by using the PUBLISH function: <http://www.mathworks.com/help/matlab/matlab_prog/publishing-matlab-code.html>...

alrededor de 12 años hace | 1

Respondida
Combine 2 plots into a single figure
One way to do this is by manipulating the XData and YData properties. Try: figure; h1 = plot(1:10); figure; h2 = plot(10...

alrededor de 12 años hace | 0

Respondida
How can i use the output of a function block just as a gain?
Use a Multiply block from the 'Math Operations' library. One input is the signal that needs to be increased in magnitude. The ot...

alrededor de 12 años hace | 0

| aceptada

Respondida
Realise transfer function through Opamp using Simulink/Simscape
Simscape and Simulink components cannot be directly connected. You need to use the blocks 'PS-Simulink Converter' or 'Simulink-P...

alrededor de 12 años hace | 0

Respondida
sigal average power estimation
I guess what you are trying to verify is the validity of Parseval's theorem. Since FFT calculates the Discrete Fourier Transfor...

alrededor de 12 años hace | 0

| aceptada

Respondida
Inquiry aboutNational Instruments PXI Xpc Target and PXI 6229
PXI-6229 is supported by the block "PCI-6229". For example see http://www.mathworks.com/help/releases/R2013b/xpc/io_ref/nation...

alrededor de 12 años hace | 0

| aceptada

Respondida
Compatibility issue with I8254x Intel Gigabit Ethernet Driver getting supported by xpc target Ethernet library "Ethernet Initialization" block with respect to xpc target 4.2 version?
The listing in https://www.mathworks.com/products/xpctarget/supported/xpc-target-supported-ethernet-chipsets.pdf is for Ethernet...

alrededor de 12 años hace | 0

| aceptada

Respondida
what is the minimum version of xPC target or MATLAB to support I2C protocol?
I2C support is not available in xPC Target by itself. What the link describes is that it is possible to have this support in xPC...

alrededor de 12 años hace | 0

Respondida
xPC UDP Ethernet Card Selection
The sharing of the Ethernet connection happens since you are using the (non real time) UDP blocks. For the targets to exchange i...

alrededor de 12 años hace | 0

Respondida
How to get current time of simulation while Model is executing.
http://www.mathworks.com/help/simulink/slref/clock.html

alrededor de 13 años hace | 0

Respondida
Unable to interpret LaTeX string "$\mathfrak{K}$"
Not all TeX/LaTeX character sequences are supported in MATLAB. All supported TeX sequences are listed at: http://www.mathwor...

alrededor de 13 años hace | 2

| aceptada

Respondida
problems during ccs v3.3 and windows 7(32-bit), Matlab R2011b
I think c2000expert has this nicely covered: http://www.youtube.com/watch?v=kiVOA5Js7Ag

alrededor de 13 años hace | 0

Resuelto

Determine if input is odd
Given the input n, return true if n is odd or false if n is even.

más de 13 años hace

Resuelto

Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...

más de 13 años hace

Respondida
Simulink - Rate Transition
The step size in configuration parameters has to be the smallest (fundamental) step size. Other blocks can have sample times tha...

alrededor de 14 años hace | 0

Respondida
BCH decoding with erasures results in nonbinary vector
For BER calculations I would suggest using an example message, encoding it, then introducing errors and erasures within the capa...

alrededor de 14 años hace | 0

Respondida
BCH decoding with erasures results in nonbinary vector
How did you generate the 'error' vector? For a BCH Decoder with N=31 and K = 16, decoding your 'error' vector without any erasur...

alrededor de 14 años hace | 0