Respondida
Output torque calculation of two geartrain mechanism
Hi @ Khyati, Based on the MathWorks documentation for Simscape Multibody Revolute Joints https://www.mathworks.com/help/sm/re...

3 meses hace | 0

Respondida
Copilot gives directions on using ARX to identify a MIMO model which do not work - what is the correct call to ARX for 5 input, 3 output system?
Hi @Sean, Thanks for reaching out about the ARX estimation error with your 5-input, 3-output system. I've reviewed the MathWo...

3 meses hace | 0

Respondida
How can I speed up simcape simulation (electrical + thermal) with tight timing constraints?
Hi Mina, Thanks for reaching out about your 4-phase buck converter simulation challenges. I've reviewed your model setup with t...

3 meses hace | 0

Respondida
PMSM 'Teknic2310P' wrong parameters
Hi @Ahmed, Great catch on spotting that discrepancy! I looked into this for you and here's what's going on: You're absol...

3 meses hace | 0

Respondida
How would i get acces to a object that i only know the name of?
Hello, I saw your post about the custom component issues in App Designer. I dug through the MathWorks docs and found what's goi...

3 meses hace | 2

Respondida
Simulation of a 3D monopole antenna
Hi @Jaume, Great question about adding thickness to your inverted-L coplanar antenna! I understand you want to add approximat...

3 meses hace | 0

| aceptada

Respondida
How to code differencial difference equation - pipe flow
Hi @Michal, I saw your post about implementing the pipe flow model with differential equations, and I've developed a complete M...

3 meses hace | 1

Respondida
How to get monthly average for ten years monthly data?
Hi @Riyadh, I reviewed your question about calculating monthly averages from 10 years of data, and I understand the issue you'r...

3 meses hace | 0

Respondida
Type-4 Wind Generator Model
Hi @Callum, I looked into your question about finding a single 2 MW Type-4 Wind Generator model in Simulink, and I think I ca...

3 meses hace | 1

| aceptada

Respondida
Cannot specify per-phase P and Q in Simscape Wye-Connected Load
Hi @Prosper, Thanks for reaching out about the Wye-Connected Load block issue. I went through your question carefully, looked...

3 meses hace | 1

| aceptada

Respondida
The generated EMPC is not giving the same results as MPC
Hi @Mayank, I came across your post about the Explicit MPC issue with your quadcopter controller, and I think I might be able t...

3 meses hace | 0

Respondida
How to configure rectangular immersion cooling tank with bottom inlet and top outlet using Simscape Tank (TL) block?
Hi Raphael, I looked into your question about modeling the immersion cooling system with the Tank (TL) block. Good news on th...

3 meses hace | 0

| aceptada

Respondida
Transmitting on 2 different USRP B210
Hi @Andrew, I saw your post about the LIBUSB_ERROR_CODE -1 you're getting with the two USRP B210s. I've spent some time digging...

3 meses hace | 0

Respondida
formula for the electric charge stored accros a Schottky junction
Hi @Jaisson, I've gone through the SPICE Diode documentation and looked into the junction charge formula issue you raised. Yo...

3 meses hace | 1

Respondida
Fixed-point precision and scaling in HDL OFDM Tx/Rx cause frame errors compared to MATLAB double implementation.
Hi @Alperen,I've read through your post and I think you're on exactly the right track suspecting fixed-point quantization as the...

3 meses hace | 0

| aceptada

Respondida
imuSensor loadparams unable to load NoiseType from json File
Hi @Brendan, I went through your post about the NoiseType parameter issue with imuSensor's loadparams function, and I complet...

3 meses hace | 0

| aceptada

Respondida
Error in close calculation and plotting
Hi @Nikita,I've identified the issue with your code. The error occurs because detrend_correl_07_slope_1 is a table, not a regula...

4 meses hace | 0

Respondida
How do I add summation to a symbolic equation in order to integrate across set bounds?
Hi @Mara, I think you're actually overthinking this a bit. The numerical approach you've already started is the right way to go...

4 meses hace | 1

Respondida
GPU Acceleration Options for Large-Scale Simscape Microgrid Simulation
Hi @Liyang, I've looked into your questions thoroughly and want to give you a complete picture of what's possible after doing...

4 meses hace | 0

| aceptada

Respondida
GigE Cam works with 2024B but not 2025B
Hi @Yuchen, I looked into your GigE camera detection issue with MATLAB 2025B and this appears to be a version-specific regres...

4 meses hace | 1

| aceptada

Respondida
How can I calculate the Variance Inflation Factor (VIF) for a linear regression model
Hi @Ojaswi, I looked into the MATLAB Central thread you shared about calculating VIF for your DOE models. The issues you ran ...

4 meses hace | 0

| aceptada

Resuelto

Combined Ages 2 - Symmetric, n ≥ 3
Following on <http://www.mathworks.com/matlabcentral/cody/problems/42382-combined-ages-1-symmetric-n-3 Combined Ages 2>, you wil...

4 meses hace

Resuelto

Combined Ages 1 - Symmetric, n = 3
You have probably seen the common riddle wherein combined ages are provided and you must determine the individual ages. For exam...

4 meses hace

Resuelto

Linear system of equations
Solve the system of equations in three variables.

4 meses hace

Resuelto

System of equations
Find a solution to a system of equations represented by a |n| by |n+1| matrix. For instance, [ 2 0 4; => 2*x = 4 ...

4 meses hace

Resuelto

linear least squares fitting
Inputs: * |f|: cell-array of function handles * |x|: column vector of |x| values * |y|: column vector of |y| values, same l...

4 meses hace

Resuelto

Column norms of a matrix
Given a matrix M, return a vector y such that for each k y(k)=norm(M(:,k)) (y(k) is the Euclidean norm of the k-th col...

4 meses hace

Respondida
how to plot these 2 column data into a curve on oxy plane
Hi @晓通, I saw your question about plotting 2-column data as a curve on the Oxy plane. I've tested a solution with your matlab...

4 meses hace | 2

| aceptada

Respondida
arduino BLE send/receive simulink problem
@Paul, After going through some extensive research online into this issue, it looks like you're dealing with a genuine Simulink ...

4 meses hace | 0

| aceptada

Respondida
How do I turn this Simulink model with Gain Control to Pole Placement?
@Farzad, your state-space block outputs displacement and velocity but not acceleration, so you need to compute acceleration usin...

4 meses hace | 0