Respondida
Can I use Arduino and Simulink for Robotic Arm Control?
It depends if the controller you design will fit on the arduino. Fundamentally, you can squeeze a couple PID controllers on an ...

más de 11 años hace | 0

Respondida
How to import time dependent matrix data in Simulink?
Check out <http://www.mathworks.com/help/simulink/ug/import-and-map-data-to-root-level-inports.html Root inport mapping>. The p...

más de 11 años hace | 0

Respondida
Installation Problem LEGO MINDSTORMS NXT
Are you running MATLAB in administrator mode? There may be some privileges you need to install cygwin. I also believe you ca...

más de 11 años hace | 0

Respondida
Is there a way to export model explorer information to Excel?
Does this <http://blogs.mathworks.com/seth/2010/10/08/model-explorer-for-data-management-and-more/ blog post about model explore...

más de 11 años hace | 0

Respondida
Simscape integrator is not working properly
From <http://www.mathworks.com/help/physmod/simscape/ug/how-simscape-simulation-works.html this page>: Finding an Initial Ste...

más de 11 años hace | 0

| aceptada

Respondida
User defined Simulink blocks, Hierachical design, Code Re-use...
Hi Alex, Based on the description I believe you want a library. Although that link has a lot of information, they are really...

más de 11 años hace | 0

Respondida
Simulink parameter optimization for walking algorithm
In my opinion, 20 Parameters is a significant optimization problem. I would try to narrow down the parameters required to those...

más de 11 años hace | 1

Respondida
How can I use a continuous integrator in atomic subsystem?
The error you are seeing is effectively saying you cannot have continuous blocks if you define a discrete sample time on the ato...

más de 11 años hace | 1

Respondida
Making sample times visible
I may need more details, but it sounds like you could put the stateflow model inside of an <http://www.mathworks.com/help/simuli...

más de 11 años hace | 0

Respondida
Why isn't there a bsxfun block in Simulink?
Why doesn't the <http://www.mathworks.com/help/simulink/slref/product.html product block> work? It can perform element by eleme...

más de 11 años hace | 1

Resuelto

Find all elements less than 0 or greater than 10 and replace them with NaN
Given an input vector x, find all elements of x less than 0 or greater than 10 and replace them with NaN. Example: Input ...

más de 11 años hace

Resuelto

Triangle Numbers
Triangle numbers are the sums of successive integers. So 6 is a triangle number because 6 = 1 + 2 + 3 which can be displa...

más de 11 años hace

Respondida
Any -WORKING- conversion function for .mdl between Simulink versions ?
If you're having a lot of trouble with exporting to a previous version there are a couple things you can try to find the problem...

más de 11 años hace | 0

Respondida
simmechanics_rigid transform error relating to the vector
Paste the offset vector in your workspace. It reads like L_Link is already a 3 element vector and you are concatenating two 0's...

más de 11 años hace | 0

Respondida
Simulink: Determine time needed for simulation
You can use the <http://www.mathworks.com/help/simulink/ug/capturing-performance-data.html Simulink Profiler>

más de 11 años hace | 0

Respondida
Array as input for look-up table in simulink
Have you tried the n-d lookup tables? If that doesn't work you can also try defining it as a data store. You can setup the IC ...

más de 11 años hace | 0

Respondida
Body CS in SimMechanics
Well if you change at the very start of simulation a parameter should work, where you define it in your workspace. So CS1 would...

más de 11 años hace | 1

Respondida
Help needed with Simulink model
Check out <http://blogs.mathworks.com/seth/2008/05/23/how-to-draw-odes-in-simulink/ this blog post> about modeling ODE's in Simu...

más de 11 años hace | 2

| aceptada

Respondida
Add Port to SimMechanics Body Block programmatically
This is a tough one for me, but I'll try to get you started. I should mention that SimMechanics 2G is now available too. If ...

casi 12 años hace | 0

Respondida
Modelling from Equations in Simulink
Check out the <http://blogs.mathworks.com/seth/2008/05/23/how-to-draw-odes-in-simulink/ modeling ODEs in Simulink> blog post. O...

casi 12 años hace | 1

Respondida
How to search .slx files (or convert them to text)
First, I would recommend finding a way to do this without using the actual text. That being said, you can open up a .slx file wi...

casi 12 años hace | 0

Respondida
can i convert the existing c code to simulink model or i have to forget about the code rebuild a model for the logic?
You can do this with <http://www.mathworks.com/help/simulink/sfg/s-function-examples.html s-functions>. If you run into trouble...

casi 12 años hace | 1

Respondida
How to stop a program after a given time input?
Try the <http://www.mathworks.com/help/matlab/ref/timer.html timer object> using a single shot execution mode.

casi 12 años hace | 0

Respondida
Running model callbacks in model workspace
I don't believe you can change the default behavior here. How much extra work is using the evalin function? Are you calling a ...

casi 12 años hace | 0

Respondida
How to create custom blocks in Simulink for Arduino
This was just posted on the <http://blogs.mathworks.com/seth/2013/04/12/creating-driver-blocks-for-arduino-lego-and-other-target...

casi 12 años hace | 0

Respondida
How to get from continuous time to discrete?
1/z and 1/s are NOT equivalent. 1/s is an integration while 1/z is a delay, totally different. You can use the <http://www.mat...

casi 12 años hace | 0

Respondida
What does error: "The selected subsystem exposes Simscape connection ports, which model reference does not support." means
The error is fairly self explaining, so I will try to clear it up as best I can. Short answer: Simscape ports (they look like...

casi 12 años hace | 1

Respondida
Simulink - SimEvents - how to design a simulation and how to remember variables - a beginner asks for help&hints
1) What do you mean by multiplying and connecting? Do you mean copying to create multiple nodes, like with a library? 2) <ht...

casi 12 años hace | 0

| aceptada

Respondida
Are there other timer predicates than after() and before() in Simulink finite state machines?
EDIT: I just realized you can get the simulation time from within stateflow. You can grab the simulation time when you enter th...

casi 12 años hace | 0

| aceptada

Respondida
Program Beagleboard-xM DSP with Simulink
Beagleboard support will not supply you with generated code that you can read. It is designed so that the code is compiled for ...

casi 12 años hace | 0