Respondida
unable to obtain required dc voltage
Hello, In this scenario, several factors could be at play. Here are some potential causes and troubleshooting steps you can con...

5 meses hace | 0

Respondida
How Ansys toolbox works?
Hello, Here are few general steps that you can follow. But before that , configure your ANSYS Workbench project with parameters...

6 meses hace | 0

Respondida
How matlab reads ansys files
Hello, Here are few steps that you can try to achieve this: You can use ANSYS scripting or the workbench's export functionalit...

6 meses hace | 0

Respondida
How to produce georeferenced maps?
To georeference your figures in MATLAB and export them for use in Google Earth, you can follow these steps: Use the boundary co...

6 meses hace | 0

Respondida
modifying pdf of a GMM using gmdistribution
Hello, To achive this, firstly evaluate the PDF of the GMM at a set of points. You can use the 'pdf' method available for a GMM...

6 meses hace | 0

Respondida
Draw mesh for 2-d array
You can try something like this to represent your array as mesh: % Example 2D data array (64x64) data = rand(64, 64); % Repla...

6 meses hace | 0

Respondida
Can we get datetime as an input variable?
Yes, you can use 'datetime' as an input variable for your models, but you will need to preprocess it appropriately. Raw datetime...

6 meses hace | 0

Respondida
Average code length and entropy
Hi, That's not always true, Huffman coding does not always achieve the entropy limit because it works with integer code lengths...

6 meses hace | 1

| aceptada

Respondida
Connecting to NI cDAQ 9133 controller
The 'getDevices' function in MATLAB typically lists devices connected directly to your computer, so it won't automatically detec...

6 meses hace | 0

Respondida
How can I call a matlab function that takes no arguments using matlab engine C++ API?
When using the MATLAB Engine C++ API to call a MATLAB function that takes no arguments, you should not pass an empty Array as an...

6 meses hace | 0

Respondida
Is there more than one way to make a class abstract?
If you want to make a class abstract without defining abstract methods or properties, you can use an abstract methods block, but...

6 meses hace | 0

Respondida
Sky plot in matlab
You can consider converting your angles from radians to degrees if needed, and ensure you are using the correct plotting functio...

6 meses hace | 0

Respondida
Smallest Alignment Index (SALI)
Here is a basic MATLAB code to compute the SALI as a function of time for orbits in a phase space of a given time series signal:...

7 meses hace | 0

Respondida
how to implement a multi user communication system?
You can extend your single-user WCDMA communication link to a multi-user communication link by using a MUX (multiplexer) and DEM...

7 meses hace | 0

Respondida
Designing a Microstrip Array Antenna Using Genetic Algorithm
Here is an example to help you get started. This example assumes you are optimizing the length and width of the patches in a mic...

7 meses hace | 0

Respondida
Auto-Regressive model in Matlab?
To determine the order of the Auto-Regressive (AR) model and find the coefficients for your EMG signal, you can use criteria suc...

7 meses hace | 0

Respondida
How to Make the Ports and Internal Variables of a FMU Block, Visible or Invisible?
The error you encountered can happen if the path is incorrect or if the block does not support the operation you're attempting. ...

7 meses hace | 0

Respondida
How to structure the data using webread
First you can parse the data to xmlData: % Convert the data from char to XML DOM xmlData = xmlreadstring(data); You can use X...

7 meses hace | 0

Respondida
How to convert from a function of frames to a function of time for radar board (Infineon Position2Go)?
Yes, you are correct. Given that the frame interval is 150 ms, it means that there are approximately 6.66 frames per second. To ...

7 meses hace | 0

Respondida
Level-2 S-Function in Simulink subsystem
Hello, To configure parameters such as IP address and sample time from a Simulink subsystem mask into a Level-2 MATLAB S-Functi...

8 meses hace | 0

Respondida
how to add disturbance into MPC block without remaking it from the beginning?
Hi Mounira, One of the possible reason behind this error coud be incorrect constraints. You can verify the inputs and constrain...

8 meses hace | 0

Respondida
I would like to create a finite element analysis simulation to determine the maximum stress occuring between two identical gears in contact
You can create the geometry of the gear profiles in MATLAB. This can be done using by using the geometry creation functions like...

8 meses hace | 0

Respondida
Delsys Signal to MATLAB Simulink
Hi Caly, The issue you're encountering with scattered data points and "square waves that have many holes in it" could be due to...

8 meses hace | 0

| aceptada

Respondida
Sheath current for a proper cross bonded cable is not zero, even in the balanced condition, how to achieve zero sheath current for a cable?
Hi Arittra, The cross-bonding arrangement connects the cable sheaths in a manner that ideally cancels out the induced voltages...

11 meses hace | 0

Respondida
3D plot for stress distribution on mesh nodes
To visualize the output from an FEM solver as a colored stress plot, you can use MATLAB. % If your data is stored in a file cal...

12 meses hace | 0

Respondida
How to connect PMSM model electrical ports to PSPICE block ports for Co-Simulation
Here's how you can make the electrical connection between the PMSM models' electrical ports and a PSPICE block to enable co-simu...

12 meses hace | 0

Respondida
How to get original intensity value from LiDAR (las) data instead of grayscale intensity
If you need the original intensity values directly from the LAS file, you may have to use a more specialized library or function...

12 meses hace | 0

Respondida
Interfacing ADC with Terasic DE4 board
Hey Abhishek, There are a few things you might want to check if you're not getting any output on your oscilloscope: Ensure th...

12 meses hace | 0

Respondida
Optimizer used in Phased Array System Toolbox for Steering Vector Synthesis
Hi Arish, The toolbox typically does not use a specific "optimizer" in the conventional sense, like those used in mathematical...

alrededor de 1 año hace | 0

Respondida
How to view the command window history?
If you are working on scripts that produce a lot of output, you can log all command window output to a file by using the "diary"...

alrededor de 1 año hace | 0