Answered
Accessing Mixed-Signal Blockset in Simulink
Mixed-Signal Blockset is introduced in R2019a. It is a separate toolbox, which will need to be acquired separately. If you don't...

alrededor de 2 meses ago | 0

Answered
Clock/pulses controller in Simulink
If you want to adjust the width or phase while the simulation is running, then you can use the Slider block. Add the Slider bloc...

alrededor de 2 meses ago | 0

Answered
How can I use named RAM arrays in the Simulink 1-D Interpolation block?
Lookup Table Dynamic

alrededor de 2 meses ago | 0

| accepted

Answered
How to rename signal in Signal Data inspector ?
Double click that signal line in the Simulink model, give it a valid signal name, the signal name will then appear in the Data I...

alrededor de 2 meses ago | 0

Answered
How to Make a Simulink Scheduler for a Matlab Block Function to run each 40 ms of simulation?
Use a Function-call Generator block, specify the sample time. Put the MATLAB Function block inside a triggered subsystem, specif...

alrededor de 2 meses ago | 0

| accepted

Answered
How can i pass a string from simulink mask to matlab function block
With R2018a (with the String Constant block) or later, you can do this, with a little extra effort. Add a 'String Constnat' blo...

alrededor de 2 meses ago | 0

Answered
Is there a way to pass the name of an input signal to a matlab function block in simulink?
Not through passing but you can get it through get_param(). Note that some functions are not supported for code generation. fun...

alrededor de 2 meses ago | 0

Answered
Simulink does not support 'Array' format for logging multiport data. Change the logging format of the Scope to 'Dataset', 'Structure', or 'Structure with time'.
See document web(fullfile(docroot, 'simulink/gui/format.html')) To use Array format, all logged states and outputs must be: ...

alrededor de 2 meses ago | 1

Answered
Implicit scalar expansion doesn't work in MATLAB function block.
Good news. It seems it is available in R2021b, but not in R2021a. Check https://www.mathworks.com/help/releases/R2021b/coder/u...

alrededor de 2 meses ago | 0

| accepted

Answered
Use #define values from a Matlab function
You might need to add the C header file and source C code file to the model, Ctrl+E, Simulation Target, Follow the example in...

alrededor de 2 meses ago | 0

Answered
Trying to read a new licence into LMTool on Linux
Name primary license file as license.dat, name secondary license file as xxx.lic. Put both in matlabroot\licenses folder and the...

alrededor de 2 meses ago | 0

Answered
Difference between successive rows in a column
a=magic(6); b=diff(a(:,4)) a(2:end,end+1)=b

alrededor de 2 meses ago | 0

Answered
How to make this string a = '(0 0 0)' into a double b = [0 0 0]?
a = '(12 2.8 1.22)'; b=sscanf(a,'(%f %f %f)') b=transpose(sscanf(a,'(%f %f %f)'))

alrededor de 2 meses ago | 0

Answered
Sharing Custom Simulink Library via Toolbox
https://www.mathworks.com/help/matlab/matlab_prog/create-and-share-custom-matlab-toolboxes.html https://www.mathworks.com/help/...

alrededor de 2 meses ago | 0

Answered
Compare all the signals from 2 data inspector or .mat files
This is exactly what Simulink Data Inspector does. Follow the documentation and examples. https://www.mathworks.com/help/simul...

alrededor de 2 meses ago | 0

Answered
How to select a subsystem for convertToModelReference with an unknown subsystem name?
Since you have only one Subsystem block in the root level of the model, this will return this Subsystem. find_system(args,'Sear...

alrededor de 2 meses ago | 1

| accepted

Answered
Disable TransportDelay warning when time delay is set to 0
I understand the convenience of your using the TransportDelay block. When there is no delay, simply set the delay to be zero. Bu...

alrededor de 2 meses ago | 0

Answered
fprintf use with error
use single quote mark, not double quote mark a=1.2; fid=1 fprintf(fid, 'this is my number %f', a)

alrededor de 2 meses ago | 0

Answered
Simulink "globals" not working as expected
"global" data store is not meant for saving data between different simulation runs. Refer to this: web(fullfile(docroot, 'sim...

alrededor de 2 meses ago | 0

| accepted

Answered
Masked Subsystem: How to pass a double vector to a constant?
I don't know why this old question suddenly appears at the top. I believe the answer to this question is a trick. Use mat2str()...

alrededor de 2 meses ago | 0

Answered
The Problem Of Multiple Gotos?
This is a bad practice or even incorrectr practice to put a "Goto" block inside a library component, which you know will be used...

alrededor de 2 meses ago | 0

Answered
using a stateflow as a subsystem reference with some parameters to be editted after instantiation
Create your Stateflow chart and create parameter variables, add a mask to the Stateflow chart to bring all those parameter varia...

2 meses ago | 0

| accepted

Answered
How do I manage the Model configuration parameters when using variant with several system targets ?
You can have multiple model configuration sets saved with the model and switch them. It can be done manully or through API. htt...

2 meses ago | 0

| accepted

Answered
how to find index from matrix in another matrix?
%C is the logical index matrix. A=zeros(2,3,4); A(:,:,4)=4; A(:,3,4)=5; C=or(A==4,A==5) %To use it to select correspondin...

2 meses ago | 0

Answered
How to open a Simulink example using command
Most likely, you don't have the toolbox installed. Or, if installed, the path is not correctly set. Try these two commands in yo...

2 meses ago | 0

Answered
know the number of open unsaved(dirty) simulink files
bd=find_system('type','block_diagram','dirty','on')

2 meses ago | 0

| accepted

Answered
Definition and Control of Variables via the Simulink Dashboard
Not sure if you are aware of the differences. The blocks in Dashboard are used to control parameter values and display signal va...

3 meses ago | 0

Answered
syntax cellstr Error when using double as input argument
There is no point comparing two functions (with the same name) in two software and demanding one behaves the same way as the oth...

3 meses ago | 1

Answered
Finding settling time of a response.
stepinfo() lsiminfo()

3 meses ago | 0

| accepted

Answered
Option to confirm tab auto-completion with 'Enter'
MATLAB Preferences, Editor/Debugger, Automatic Completions Command Window, Automatic Completions

3 meses ago | 0

Load more