Respondida
Ettus E310 setup issues. Incompatible Hardware.
Hi Will, Another customer has experienced the same issue, and by comparing their installation with yours, we were able to fig...

casi 7 años hace | 0

Respondida
How to use external refernce clock with PicoZed SDR and MATLAB
Hi Yannay, Unfortunately at this point there is no easy way to configure the external clock using our tools. If you require f...

casi 7 años hace | 0

Respondida
is it possible to create a stand alone system using simulink libraries?
Hi Samer, There are a couple of methods you can use to send or receive data with MATLAB disconnected. Firstly, the <https:...

casi 7 años hace | 1

| aceptada

Respondida
Offline Install of Communications System Toolbox Support Package for Xilinx Zynq-Based Radio
Hi Seth, Please could you contact <https://uk.mathworks.com/support/contact_us/ technical support> for this question? Than...

alrededor de 7 años hace | 0

Respondida
Difference between SDR transmitter and tx.transmitrepeat function
Hi Angie, When you use the Simulink block, you are attempting to stream data from Simulink across the Ethernet link to the bo...

alrededor de 7 años hace | 0

| aceptada

Respondida
Issue with generated library blocks
Hi Faris, You are using the support package in two different ways in your description above. In the second case, you are ...

alrededor de 7 años hace | 0

| aceptada

Respondida
[Zynq ad9361 fmscomms2] Frame Size increase
Hello, yes you can change the data packet size that is sent to the transmitter. In the example, the software running on the ARM ...

alrededor de 7 años hace | 1

| aceptada

Respondida
[zynq communication toolbox] how to specify the sampling rate
Hi Jeffrey, The Baseband sample rate parameter on the SDR transmitter block is the rate at which the sample will be sent by t...

más de 7 años hace | 0

Respondida
Zynq SDR: sustained transfer of data from picozed?
Hi, The N210 and PicoZed SDR are based on different infrastructure, so may behave in different ways. For the PicoZed SDR, the...

más de 7 años hace | 0

Respondida
HW/SW Co-design full deployment using ZedBoard issues
Hi John, My apologies for the late response. It's good to hear you've already come as far as you have. Some responses to your...

casi 8 años hace | 2

Respondida
ZedBoard connection problems after loading a custom bitstream
Hi Johannes, Apologies for the delayed response. It is unlikely to be the anti-virus or firewall behaviour. It's hard to tell...

casi 8 años hace | 0

Respondida
How to specify sample rates for Xilinx Zynq-Based Radio?
Hi Johannes, Apologies for the delay in responding. Unfortunately you are hitting a limitation in the FPGA-only targeting wor...

casi 8 años hace | 0

Respondida
IP Core genration in hdl coder for Zedboard FMCOMMS2 Channel Mapping
Hi Pooria, I'm afraid the the targeting workflow is only supported from Simulink. You could try including your m-code in a <...

casi 8 años hace | 0

| aceptada

Respondida
IP Core genration in hdl coder for Zedboard FMCOMMS2 Channel Mapping
Hi Pooria, Thanks for your question. I need some more information on what you are trying to do to be able to answer your quer...

casi 8 años hace | 0

Respondida
Why Mathworks SDR Firmware is unable to read FRU/EEPROM information on 'ZedBoard and FMCOMMS2/3/4'
Hi, In the MathWorks SDR firmware, the FRU information is read only to identify the RF card to set the correct maximum number...

alrededor de 8 años hace | 0

| aceptada

Respondida
Support and Limitations using Mathworks Software w/ Avnet PicoZedSDR
Hi Richard, The <http://www.mathworks.com/hardware-support/zynq-sdr.html Zynq Radio HSP> will let you stream data into and ou...

alrededor de 9 años hace | 1

| aceptada