dpcmdeco

R2026b

Decode using differential pulse code modulation

Syntax

sig = dpcmdeco(indx,codebook,predictor)

[sig,quanterr] = dpcmdeco(indx,codebook,predictor)

Description

sig = dpcmdeco(indx,codebook,predictor) implements differential pulse code demodulation (DPCM) to decode the vector indx.

[sig,quanterr] = dpcmdeco(indx,codebook,predictor) returns the quantized predictive error quanterr.

Examples

Quantize Signals Using DPCM Encoding and Decoding

Use DPCM encoding and decoding to quantize the difference between the value of the current signal sample and the value of the previous sample. For this example, you use a predictor $y\left(k\right)=x\left(k-1\right)$. Then, encode a sawtooth signal, decode it, plot both the original and the decoded signals, and compute the mean square error between the original and decoded signals.

partition = [-1:.1:.9];
codebook = [-1:.1:1];
predictor = [0 1];      % y(k)=x(k-1)
t = [0:pi/50:2*pi];     % Time samples
x = sawtooth(3*t);      % Original signal

Quantize x using DPCM encoding.

encodedx = dpcmenco(x,codebook,partition,predictor);

Recover x from the modulated signal by using DPCM decoding. Plot the original signal and the decoded signal. The solid line is the original signal, while the dashed line is the recovered signal.

decodedx = dpcmdeco(encodedx,codebook,predictor);
plot(t,x,t,decodedx,'-')

Compute the mean square error between the original signal and the decoded signal.

distor = sum((x-decodedx).^2)/length(x)

distor = 
0.0327

Optimize DPCM Parameters for Quantization

To optimize a DPCM-encoded and -decoded sawtooth signal, use the dpcmopt function with the dpcmenco and dpcmdeco functions. Testing and selecting parameters for large signal sets with a fine quantization scheme can be tedious. One way to produce partition, codebook, and predictor parameters easily is to optimize them according to a set of training data. The training data should be typical of the kinds of signals to be quantized with dpcmenco.

This example uses the predictive order 1 as the desired order of the new optimized predictor. The dpcmopt function creates these optimized parameters, using the sawtooth signal x as training data. The example goes on to quantize the training data itself. In theory, the optimized parameters are suitable for quantizing other data that is similar to x. The mean square distortion for optimized DPCM is much less than the distortion with nonoptimized DPCM parameters.

Define variables for a sawtooth signal and initial DPCM parameters.

t = [0:pi/50:2*pi];
x = sawtooth(3*t);
partition = [-1:.1:.9];
codebook = [-1:.1:1];
predictor = [0 1];      % y(k)=x(k-1)

Optimize the partition, codebook, and predictor vectors by using the dpcmopt function and the initial codebook and order 1. Then generate DPCM encoded signals by using the initial and the optimized partition and codebook vectors.

[predictorOpt,codebookOpt,partitionOpt] = dpcmopt(x,1,codebook);
encodedx = dpcmenco(x,codebook,partition,predictor);
encodedxOpt = dpcmenco(x,codebookOpt,partitionOpt,predictorOpt);

Recover x from the modulated signal by using DPCM decoding. Compute the mean square error between the original signal and the decoded and optimized decoded signals.

decodedx = dpcmdeco(encodedx,codebook,predictor);
decodedxOpt = dpcmdeco(encodedxOpt,codebookOpt,predictorOpt);
distor = sum((x-decodedx).^2)/length(x);
distorOpt = sum((x-decodedxOpt).^2)/length(x);

Compare mean square distortions for quantization with the initial and optimized input arguments.

[distor, distorOpt]

ans = 1×2

    0.0327    0.0009

Input Arguments

indx — Signal to decode

vector

Signal to decode, specified as a vector.

Data Types: double

codebook — Predictive error quantization codebook

vector

Predictive error quantization codebook, specified as a vector.

Data Types: double

predictor — Predictive transfer function

vector

Predictive transfer function, specified as a vector. In general, an Mth order transfer function has the form [0, n1, n2, ... nM].

Data Types: double

Note

You can estimate codebook, partition, and predictor input parameters using the dpcmopt function.

Output Arguments

sig — Decoded signal

vector

Decoded signal, specified as a vector.

Data Types: double

quanterr — Quantized predictive error

vector

Quantized predictive error, specified as a vector.

Data Types: double

References

[1] Kondoz A. M., Digital Speech. Chichester, England: John Wiley & Sons, 1994.

Version History

Introduced before R2006a