Send PING Request to Xilinx Zynq Platform

To check if the Xilinx^® Zynq^® hardware is properly configured, repeat the steps in Hardware Setup.

In the MATLAB^® Command Window, execute:

system('ping 192.168.1.101');

You get 0% loss as shown in this response:

Pinging 192.168.1.101 with 32 bytes of data: 
Reply from 192.168.1.101: bytes=32 time=5ms TTL=64 
Reply from 192.168.1.101: bytes=32 time=2ms TTL=64 
Reply from 192.168.1.101: bytes=32 time=2ms TTL=64 
Reply from 192.168.1.101: bytes=32 time=2ms TTL=64 
 
Ping statistics for 192.168.1.101: 
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), 
Approximate round trip times in milli-seconds: 
    Minimum = 2ms, Maximum = 5ms, Average = 2ms

After a successful ping acknowledgment from the Xilinx Zynq hardware board, you can proceed with Configure Command-Line Session for Xilinx Zynq Platform.