Code Generation for Parametric Audio Equalizer
This example shows how to model an algorithm specification for a three band parametric equalizer which will be used for code generation.
Required MathWorks™ products:
DSP System Toolbox™
Parametric equalizers are often used to adjust the frequency response of an audio system. For example, a parametric equalizer can be used to compensate for physical speakers which have peaks and dips at different frequencies.
The parametric equalizer algorithm in this example provides three second-order (biquadratic) filters whose coefficients can be adjusted to achieve a desired frequency response. A user interface is used in simulation to dynamically adjust filter coefficients and explore behavior. For code generation, the coefficient variables are named and placed in files such that they could be accessed by other software components that dynamically change the coefficients while running on the target processor.
The following sections will describe how the parametric equalizer algorithm is specified, how the behavior can be explored through simulation, and how the code can be generated and customized.
The parametric equalizer algorithm is specified in two parts: a model specification and a parameterized data specification. The model specification is a Simulink subsystem that specifies the signal flow of the algorithm. The model specification also accesses parameterized data that exists in the MATLAB workspace. The parameterized data specification is a MATLAB script that creates the data that is accessed by the Simulink model.
For this example, the model specification is the Equalizer subsystem of the Simulink model dspparameqcodegen. In this subsystem, the input is passed through three cascaded bands of equalization. Coefficient changes within each band are smoothed through a leaky integrator before being passed into a Biquad Filter block. Each Biquad Filter block is configured to use a different filter structure. Different filter structures are selected to show the differences in code generation later in this example.
For this example, the parameterized data specification is the MATLAB script dspparameq_data.m. This MATLAB script specifies the initial filter coefficients as well as code generation attributes. When you open the model dspparameqcodegen, the model's
PreLoadFcn callback is configured to run the dspparameq_data.m script that creates the parameter data in the MATLAB workspace.
Explore Behavior Through Simulation
You can use a simulation test bench to explore the behavior of the algorithm. In this example, the test bench consists of the simulation model, dspparameqcodegen, as a well as custom user interface (UI) programmed in MATLAB.
This UI can be launched by clicking the 'Launch Parameter Tuning UI' link. The UI enables dynamic adjustment of coefficient parameter data in the MATLAB workspace during the simulation.
Generate C Code for the Equalizer Subsystem
Once you achieve the desired simulation behavior, you can generate C code for the Equalizer subsystem based on the algorithm specification. This model is configured to show some common code generation customizations accessible from Embedded Coder product. These customizations ease the code review and integration process. The following sections show some of the code customizations for this model and provide references to documentation that describe these customizations in more detail.
To generate C code, right-click on the Equalizer subsystem, select Code Generation > Build Subsystem, then click the Build button when prompted for tunable parameters. You can also generate code by clicking the following hyperlink: Generate Code for the Equalizer Subsystem.
Code Generation Report with Links to and from the Model
The model is configured to generate an HTML report that can be used to navigate the generated source and header files. The report also enables bidirectional linking between the generated code and the model. For example, each Biquad Filter block is configured to implement a different filter structure. You can trace from the block to the associated code by right clicking on any of the Biquad Filter blocks and then selecting Code Generation > Navigate to code.
For more information on traceability between the model and code see Trace Simulink Model Elements in Generated Code (Embedded Coder).
Calling the Generated Code
You can integrate the generated code into an application by making calls to the model initialization and model step functions. An example
ert_main.c file is generated that shows how to call the generated code. Note that the example
Equalizer_initialize() to initialize states. The example
rt_OneStep() shows how a periodic mechanism such as an interrupt would call
Equalizer_step() from the file
For more information about how to integrate generated code into another application see Deploy Applications to Target Hardware (Embedded Coder).
Input and Output Data Interface
The parameterized data specification file, dspparameq_data.m, creates
out signal data objects in the MATLAB workspace. These data objects are associated with signal lines in the model and are used to specify descriptions and storage classes of the corresponding variables in the generated code. For example, the signals
out are declared as a global variable in
Equalizer.c. To run the model step function, an application writes data to
in, calls the
Equalizer_step() function, and then reads the results from
For more information on Data Objects see Create Data Objects for Code Generation with Data Object Wizard (Embedded Coder).
Text Annotations in Code Comments
You can insert design documentation entered as text in the model into the comments of the generated code. The
Equalizer subsystem contains annotation text with the keyword
S:Description. The code generator identifies that the text starts with this keyword and inserts the text following the keyword as comments into the generated code.
For more information on inserting annotation text into code comments see Add Global Comments in the Generated Code (Embedded Coder).
To ease navigation of the generated code, each subsystem for the equalizer bands is configured to be atomic and create its own function. You can see the calling order in the
For more information on customizing function naming and placement see About Nonvirtual Subsystem Code Generation (Embedded Coder).
Coefficient File Placement
The parameterized data specification file, dspparameq_data.m creates parameter data objects for the coefficients in the MATLAB workspace. These data objects are configured to define and declare coefficient variables in separate files
biquad_coeffs.h respectively. Partitioning coefficients into separate files enables other software components to access this data. For example, in a deployed application, you could schedule another software component to modify these variables at runtime before they are used by
For more information about file placement of Data Objects see Control Placement of Global Data Definitions and Declarations in Generated Files (Embedded Coder).
Filter Design Parameters in Coefficient Variable Comments
When coefficients are calculated (in the parameterized data file or by the graphical user interface), the filter design parameters are stored in the
Description field of the coefficient parameter data objects. The model is configured to insert the design parameters as comments in the generated code. This enables reviewers of the code to easily identify which design parameters were used to design the filters.
For more information on customizing the comments of Data Objects in the generated code see Add Custom Comments for Variables in the Generated Code (Embedded Coder).
Package Generated Files
The generated files referenced by the HTML report exist in the
Equalizer_ert_rtw directory. In addition to the files in this directory, other files in the MATLAB application install directory may be required for integration into a project. To ease porting the generated code to other environments, this model is configured to use the PackNGo feature, which packages up all of the required files into the zip file
Equalizer.zip. Note that the zip file contains all of the required files, but might also contain additional files that may not be required.
For more information on packaging files for integration into other environments, see Relocate or Share Generated Code (Simulink Coder).