Hardware Implementation Pane: ARM Cortex-R Processors

To configure hardware parameters for ARM^® Cortex^®-R Hardware boards, follow these steps:

In the Simulink^® Editor, select Simulation > Model Configuration Parameters.
In the Configuration Parameter dialog box, click Hardware Implementation.
Set the Hardware board parameter to TI Hercules RM57Lx Launchpad and click Apply.
The parameter values under Hardware board settings are automatically populated to their default values.
You can optionally adjust these parameters for your particular use case.
Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane.

Parameter	Description
Base rate task priority	Static priority of base rate task of Simulink model

Parameter	Description
Build action	Simulink Coder™ build operation for model
Flash erase options	Options for software writes of new builds to flash memory on hardware board

Parameter	Description
CPU Clock Frequency (MHz)	Frequency of the primary CPU core clock
System Clock Frequency (MHz)	System clock frequency on ARM Cortex-R processors
Primary Peripheral Clock Frequency (MHz)	Primary peripheral clock frequency on the ARM Cortex-R processors

Parameter	Description
Serial port	Serial port selection for connection between Texas Instruments^® Hercules RM57Lx Launchpad hardware board and host computer
Baud rate	Baud rate of serial port on host computer and target hardware

Parameter	Description
Communication interface	Transport layer external mode uses to exchange data
Serial port	Serial port selection for connection between Texas Instruments Hercules RM57Lx Launchpad hardware board and host computer
Baud rate	Baud rate of serial port on host computer and target hardware
Wait for a start packet from the host before execution	Option to delay start of execution until start packet is received from host computer