setTflCOperationEntryParameters
Set specified parameters for operator entry in code replacement table
Description
Examples
Set Parameters for Addition Operator Entry
This example shows how to use the
setTflCOperationEntryParameters
function to set
parameters for a code replacement operator entry for uint8
addition that matches a cast-after-sum algorithm.
op_entry = RTW.TflCOperationEntry; op_entry.setTflCOperationEntryParameters( ... 'Key', 'RTW_OP_ADD', ... 'EntryInfoAlgorithm', 'RTW_CAST_AFTER_OP', ... 'Priority', 90, ... 'SaturationMode', 'RTW_SATURATE_UNSPECIFIED', ... 'RoundingModes', {'RTW_ROUND_UNSPECIFIED'}, ... 'ImplementationName', 'u8_add_u8_u8', ... 'ImplementationHeaderFile', 'u8_add_u8_u8.h', ... 'ImplementationSourceFile', 'u8_add_u8_u8.c');
Set Parameters for Fixed-Point Division Operator Entry
This example shows how to use the
setTflCOperationEntryParameters
function to set
parameters for a code replacement operator entry for fixed-point
int16
division. The table entry specifies a net scaling
between the operator inputs and output to map a range of slope and bias values
to a replacement operation.
op_entry = RTW.TflCOperationEntryGenerator_NetSlope; op_entry.setTflCOperationEntryParameters( ... 'Key', 'RTW_OP_DIV', ... 'Priority', 90, ... 'SaturationMode', 'RTW_WRAP_ON_OVERFLOW', ... 'RoundingModes', {'RTW_ROUND_CEILING'}, ... 'NetSlopeAdjustmentFactor', 1.0, ... 'NetFixedExponent', 0.0, ... 'ImplementationName', 's16_div_s16_s16', ... 'ImplementationHeaderFile', 's16_div_s16_s16.h', ... 'ImplementationSourceFile', 's16_div_s16_s16.c' );
Set Parameters for Fixed-Point Addition Operator Entry
This example shows how to use the
setTflCOperationEntryParameters
function to set
parameters for a code replacement operator entry for fixed-point
uint16
addition that matches a cast-after-sum algorithm.
The parameters 'SlopesMustBeTheSame' and 'MustHaveZeroNetBias' must be set to
true
to specify equal slope and zero net bias across
operator inputs and output. This maps relative slope and bias values (rather
than a specific slope and bias combination) to a replacement operation.
op_entry = RTW.TflCOperationEntryGenerator; op_entry.setTflCOperationEntryParameters( ... 'Key', 'RTW_OP_ADD', ... 'EntryInfoAlgorithm', 'RTW_CAST_AFTER_OP', ... 'Priority', 90, ... 'SaturationMode', 'RTW_WRAP_ON_OVERFLOW', ... 'RoundingModes', {'RTW_ROUND_UNSPECIFIED'}, ... 'SlopesMustBeTheSame', true, ... 'MustHaveZeroNetBias', true, ... 'ImplementationName', 'u16_add_SameSlopeZeroBias', ... 'ImplementationHeaderFile', 'u16_add_SameSlopeZeroBias.h', ... 'ImplementationSourceFile', 'u16_add_SameSlopeZeroBias.c');
Input Arguments
hEntry
— Handle to a code replacement table entry
handle
The hEntry
is a handle to a code replacement
table entry previously returned by one of the class instantiations in the
table.
Class Instantiation | Support |
---|---|
| Supports operator replacement. |
| Provides parameters for fixed-point addition and
subtraction that are not available in
|
| Provides net slope parameters for fixed-point
multiplication and division that are not available in
|
| Supports replacement of nonscalar operators with MathWorks BLAS functions. |
| Supports replacement of nonscalar operators with ANSI®/ISO® C BLAS functions. |
(where
| Supports operator replacement using custom code replacement table entries. |
If you want to specify SlopesMustBeTheSame
or
MustHaveZeroNetBias
for your operator entry,
instantiate your table entry using
rather than
hEntry
=
RTW.TflCOperationEntryGenerator
. If you want to use
hEntry
=
RTW.TflCOperationEntryNetSlopeAdjustmentFactor
and
NetFixedExponent
, instantiate your table entry by
using
.hEntry
=
RTW.TflCOperationEntryGenerator_NetSlope
Example: op_entry
varargin
— Name-value pairs of arguments for operation entry
name-value pairs
Example: 'Key','RTW_OP_ADD'
Name-Value Arguments
Specify optional pairs of arguments as
Name1=Value1,...,NameN=ValueN
, where Name
is
the argument name and Value
is the corresponding value.
Name-value arguments must appear after other arguments, but the order of the
pairs does not matter.
Before R2021a, use commas to separate each name and value, and enclose
Name
in quotes.
Example: 'Key','RTW_OP_ADD'
AcceptExprInput
— Specifies whether implementation operation accepts expression inputs
true
| false
The AcceptExprInput
value flags the code
generator that the implementation function described by this entry
accepts expression inputs. The default value is true
if ImplType
equals FCN_IMPL_FUNCT
and false
if ImplType
equals
FCN_IMPL_MACRO
.
If the value is true
, expression inputs are
integrated into the generated code in a form similar to this
form:
rtY.Out1 = myAdd(rtU.In1, rtU.In2 * rtU.In3);
If the value is false
, a temporary variable is
generated for the expression input:
real_T temp; temp = rtU.In2 * rtU.In3; rtY.Out1 = myAdd(rtU.In1, temp);
Example: 'AcceptExprInput',true
AdditionalHeaderFiles
— Specifies additional header files for table entry
{}
(default) | array of character vectors | string array
The AdditionalHeaderFiles
value specifies
additional header files for a code replacement table entry. The
character vectors or string array can include tokens. For example, in
the token $mytoken$
, mytoken
is a
variable defined as a character vector or string scalar in the
MATLAB® workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'AdditionalHeaderFiles',{}
AdditionalIncludePaths
— Specifies additional include paths for table entry
{}
(default) | array of character vectors | string array
The AdditionalIncludePaths
value specifies
the full path of additional include paths for a code replacement entry.
The character vectors or string array can include tokens. For example,
in the token $mytoken$
, mytoken
is
a variable defined as a character vector or string scalar in the
MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'AdditionalIncludePaths',{}
AdditionalLinkObjs
— Specifies additional link objects for table entry
{}
(default) | array of character vectors | string array
The AdditionalLinkObjs
value specifies
additional link objects for a code replacement table entry. The
character vectors or string array can include tokens. For example, in
the token $mytoken$
, mytoken
is a
variable defined as a character vector or string scalar in the
MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'AdditionalLinkObjs',{}
AdditionalLinkObjsPaths
— Specifies additional link object paths for table entry
{}
(default) | array of character vectors | string array
The AdditionalLinkObjsPaths
value specifies
the full path of additional link object paths for a code replacement
entry. The character vectors or string array can include tokens. For
example, in the token $mytoken$
,
mytoken
is a variable defined as a character
vector or string scalar in the MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'AdditionalLinkObjsPaths',{}
AdditionalSourceFiles
— specifies additional source files for table entry
{}
(default) | array of character vectors | string array
The AdditionalSourceFiles
value specifies
additional source files for a code replacement table entry. The
character vectors or string array can include tokens. For example, in
the token $mytoken$
, mytoken
is a
variable defined as a character vector or string scalar in the
MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'AdditionalSourceFiles',{}
AdditionalSourcePaths
— Specifies additional source paths for table entry
{}
(default) | array of character vectors | string array
The AdditionalSourcePaths
value specifies
the full path of additional source paths for a code replacement entry.
The character vectors or string array can include tokens. For example,
in the token $mytoken$
, mytoken
is
a variable defined as a character vector or string scalar in the
MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'AdditionalSourcePaths',{}
AdditionalCompileFlags
— Specifies additional compiler flags for table entry
{}
(default) | array of character vectors | string array
The AdditionalCompileFlags
value specifies
additional flags required to compile the source files defined for a code
replacement table entry.
Example: 'AdditionalCompileFlags',{}
AdditionalLinkFlags
— Specifies additional linker flags for table entry
{}
(default) | array of character vectors | string array
The AdditionalLinkFlags
value specifies
additional flags required to link the compiled files for a code
replacement table entry.
Example: 'AdditionalLinkFlags',{}
AllowShapeAgnosticMatch
— Enables matrix matches based on the total number of elements rather than specific matrix shape
false
(default) | true
The AllowShapeAgnosticMatch
value enables
code replacement match based on total number of elements rather than
specific matrix shape for matrices that are contiguously allocated in
memory. For more information, see Allow Shape Agnostic Match.
Example: 'AllowShapeAgnosticMatch',
false
ArrayLayout
— Specifies layout of array storage for table entry
'COLUMN_MAJOR'
(default) | 'ROW_MAJOR'
| 'COLUMN_AND_ROW'
The ArrayLayout
value specifies the order
of array elements in memory supported by the replacement implementation.
By default, the replacement implementation supports column-major data
layout. For ROW-MAJOR
, the replacement implementation
supports row-major data layout. For COLUMN_AND_ROW
,
the replacement implementation supports column-major and row-major data
layouts.
Example: 'ArrayLayout','ROW_MAJOR'
EntryInfoAlgorithm
— Specifies math algorithm to match for table entry
'RTW_CAST_BEFORE_OP'
(default) | 'RTW_CAST_AFTER_OP'
The EntryInfoAlgorithm
value specifies the
algorithm for the specified math function that must be matched for
operator replacement to occur. Code replacement libraries support
replacement based on the algorithm for math operations
RTW_OP_ADD
and RTW_OP_MINUS
.
Valid arguments for the supported operations are listed in the table.
The arguments have the same meaning for both operations.
Argument | Meaning |
---|---|
| Before performing the operation, type cast input values to the output data type. If the output type cannot exactly represent the input values, losses can occur as a result of the cast to the output type. Additional loss can occur when the result of the operation is cast to the final output type. |
| Compute the ideal result of the operation of inputs. Then, type cast the result to the output data type. Loss occurs during the type cast. This algorithm behaves similarly to the C language except when the signedness of the operands does not match. For example, when you add a signed long operation to an unsigned long operand, standard C language rules convert the signed long operand to an unsigned long operand. The result is a value that is not ideal. |
Example: 'EntryInfoAlgorithm','RTW_CAST_AFTER_OP'
GenCallback
— Specifies callback that follows code generation
''
(default) | 'RTW.copyFileToBuildDir'
The GenCallback
specifies a callback that
follows code generation. If you specify
'RTW.copyFileToBuildDir'
, and if this operation
entry is matched and used, the code generator calls function
RTW.copyFileToBuildDir
after code generation.
This callback function copies additional header, source, or object files
that you have specified for this entry to the build folder.
Example: 'GenCallback','RTW.copyFileToBuildDir'
ImplementationHeaderFile
— Specifies name of header file that declares implementation operation
''
(default) | character vector | string scalar
The ImplementationHeaderFile
value
specifies the name of the header file that declares the implementation
function. The character vector or string scalar can include tokens. For
example, in the token $mytoken$
,
mytoken
is a variable defined as a character
vector or string scalar in the MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'ImplementationHeaderFile','s32_mul.h'
ImplementationHeaderPath
— Specifies path to implementation header file
''
(default) | character vector | string scalar
The ImplementationHeaderPath
value
specifies the full path to the implementation header file. The character
vector or string scalar can include tokens. For example, in the token
$mytoken$
, mytoken
is a
variable defined as a character vector or string scalar in the
MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'ImplementationHeaderPath', fullfile('$MATLAB_ROOT',
'crl')
ImplementationName
— Specifies name of implementation function
''
(default) | character vector | string scalar
The ImplementationName
value specifies the
name of the implementation function, which can match or differ from the
Key
name.
Example: 'ImplementationName','s32_mul_s32_s32_sat'
ImplementationSourceFile
— specifies name of implementation source file
''
(default) | character vector | string scalar
The ImplementationSourceFile
value
specifies the name of the implementation source file. The character
vector or string scalar can include tokens. For example, in the token
$mytoken$
, mytoken
is a
variable defined as a character vector or string scalar in the
MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'ImplementationSourceFile','s32_mul.c'
ImplementationSourcePath
— Specifies path to implementation source file
''
(default) | character vector | string scalar
The ImplementationSourcePath
value
specifies the full path to the implementation source file. The character
vector or string scalar can include tokens. For example, in the token
$mytoken$
, mytoken
is a
variable defined as a character vector or string scalar in the
MATLAB workspace or as a MATLAB function in the search path that returns a character
vector.
Example: 'ImplementationSourcePath', fullfile('$MATLAB_ROOT',
'crl')
ImplType
— Specifies whether the table entry is for an implementation function or macro
'FCN_IMPL_FUNCT'
(default) | 'FCN_IMPL_MACRO'
The ImplType
value specifies the type of
table entry. Use FCN_IMPL_FUNCT
for function or
FCN_IMPL_MACRO
for macro.
Example: 'ImplType','FCN_IMPL_FUNCT'
Key
— Specifies key for operator to replace
character vector | string scalar
The Key
value specifies the key for the
operator to replace. The key must match an operator key listed in Code You Can Replace from MATLAB Code or Code You Can Replace From Simulink Models.
Example: 'Key','RTW_OP_ADD'
MustHaveZeroNetBias
— Specifies net bias requirement for conceptual arguments of Add/Minus entries
false
(default) | true
The MustHaveZeroNetBias
value specifies
whether a replacement match requires that the net bias for conceptual
arguments of Add/Minus entries is zero. For the Add/Minus of fixed-point
operator inputs and output this parameter must be set to
true
. Instantiate the entry by using
rather than
hEntry
=
RTW.TflCOperationEntryGenerator
. hEntry
=
RTW.TflCOperationEntry
For Mul/Div/MulDiv/Shift/Cast entries:
The code generator ignores the value of this argument.
The bias of the conceptual arguments for Mul/Div/MulDiv/Shift/Cast entries must be zero for a replacement match to occur.
Example: 'MustHaveZeroNetBias',true
NetFixedExponent
— Specifies fixed exponent part of net slope for fixed-point conceptual arguments of Mul/Div/MulDiv/Shift/Cast entries
0
(default) | numeric scalar
The NetSlopeAdjustmentFactor
value
specifies the fixed exponent (E) part of the net slope
(F2E, for example, -3.0) for fixed-point
conceptual arguments required for a replacement match to occur for
Mul/Div/MulDiv/Shift/Cast entries. Instantiate an entry by using
rather than
hEntry
=
RTW.TflCOperationEntryGenerator_NetSlope
.hEntry
=
RTW.TflCOperationEntry
For Add/Minus entries:
The code generator ignores the value of this argument.
The slope adjustment factor part of the net slope of the conceptual arguments for Add/Minus entries must be zero for a replacement match to occur.
Example: 'NetFixedExponent', -3.0
NetSlopeAdjustmentFactor
— Specifies slope adjustment part of net slope requirement for fixed-point conceptual arguments of Mul/Div/MulDiv/Shift/Cast
entries
1
(default) | numeric scalar
The NetSlopeAdjustmentFactor
value
specifies the slope adjustment part of the net slope
(F2E, for example, 1.0) for fixed-point
conceptual arguments required for a replacement match to occur for
Mul/Div/MulDiv/Shift/Cast entries. Instantiate an entry by using
rather than
hEntry
=
RTW.TflCOperationEntryGenerator_NetSlope
.hEntry
=
RTW.TflCOperationEntry
For Add/Minus entries:
The code generator ignores the value of this argument.
The slope adjustment factor part of the net slope of the conceptual arguments for Add/Minus entries must be zero for a replacement match to occur.
Example: 'NetSlopeAdjustmentFactor',1.5
Priority
— Specifies the search priority of operator entry
100
(default) | integer value 0..100
The Priority
value specifies the search
priority of the operation entry, relative to other entries of the same
operation name and conceptual argument list within this table. Highest
priority is 0, and lowest priority is 100. If the table provides two
implementations for an operation, the implementation with the higher
priority shadows the one with the lower priority.
Example: 'Priority',100
RoundingModes
— Specifies rounding modes supported by implementation function
'RTW_ROUND_UNSPECIFIED'
(default) | 'RTW_ROUND_FLOOR'
| 'RTW_ROUND_CEILING'
| 'RTW_ROUND_ZERO'
| 'RTW_ROUND_NEAREST'
| 'RTW_ROUND_NEAREST_ML'
| 'RTW_ROUND_CONV'
| 'RTW_ROUND_SIMPLEST'
| array of character vectors | string array
The RoundingModes
value specifies one or
more rounding modes supported by the implementation function.
Example: 'RoundingModes',{'RTW_ROUND_UNSPECIFIED'}
SaturationMode
— specifies saturation mode supported by implementation function
'RTW_SATURATE_UNSPECIFIED'
(default) | 'RTW_SATURATE_ON_OVERFLOW'
| 'RTW_WRAP_ON_OVERFLOW'
| character vector | string scalar
The SaturationMode
value specifies the
saturation mode supported by the implementation function.
Example: 'SaturationMode','RTW_SATURATE_UNSPECIFIED'
SideEffects
— Specifies whether to attempt to optimize away the implementation function
false
(default) | true
The SideEffects
value flags the code
generator not to optimize away the implementation function described by
this entry. This parameter applies to implementation functions that
return void
but are not to be optimized away, such as
a memcpy
implementation or an implementation
function that accesses global memory values. For those implementation
functions only, you must include this parameter and specify the value
true
.
Example: 'SideEffects',false
SlopesMustBeTheSame
— Specifies slope requirement for conceptual arguments of Mul/Div/MulDiv/Shift/Cast entries
false
(default) | true
The SlopesMustBeTheSame
value specifies
whether a replacement match requires that the slope is the same for
conceptual arguments of Mul/Div/MulDiv/Shift/Cast entries. Instantiate
the entry by using
rather than
hEntry
=
RTW.TflCOperationEntryGenerator
.hEntry
=
RTW.TflCOperationEntry
For Add/Minus entries:
The code generator ignores the value of this argument.
This parameter must be set to
true
. When set totrue
, the slopes of the conceptual arguments are equal for a replacement match to occur.
Example: 'SlopesMustBeTheSame',true
StoreFcnReturnInLocalVar
— Specifies whether to store the implementation function regardless expression folding settings
false
(default) | true
The StoreFcnReturnInLocalVar
value flags
the code generator that the return value of the implementation function
described by this entry must be stored in a local variable regardless of
other expression folding settings. If the value is
false
, other expression folding settings
determine whether the return value is folded. Storing function returns
in a local variable can increase the clarity of generated code. This
example shows code generated with expression folding:
void sw_step(void) { if (ssub(sadd(sw_U.In1, sw_U.In2), sw_U.In3) <= smul(ssub(sw_U.In4, sw_U.In5),sw_U.In6)) { sw_Y.Out1 = sw_U.In7; } else { sw_Y.Out1 = sw_U.In8; } }
With StoreFcnReturnInLocalVar
set to
true
, the generated code is potentially easier to
understand and debug:
void sw_step(void) { real32_T rtb_Switch; real32_T hoistedExpr; ...... rtb_Switch = sadd(sw_U.In1, sw_U.In2); rtb_Switch = ssub(rtb_Switch, sw_U.In3); hoistedExpr = ssub(sw_U.In4, sw_U.In5); hoistedExpr = smul(hoistedExpr, sw_U.In6); if (rtb_Switch <= hoistedExpr) { sw_Y.Out1 = sw_U.In7; } else { sw_Y.Out1 = sw_U.In8; } }
Example: 'StoreFcnReturnInLocalVar',false
Version History
Introduced in R2007b
Comando de MATLAB
Ha hecho clic en un enlace que corresponde a este comando de MATLAB:
Ejecute el comando introduciéndolo en la ventana de comandos de MATLAB. Los navegadores web no admiten comandos de MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)