Username

User name for operating system on target hardware

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Board Parameters

Description

The Username parameters sets the user name for the Linux^® operating system on the target hardware.

When you use the Support Package Installer to update the hardware board firmware, the Support Package Installer automatically applies the value you entered during the update to this parameter.

Dependencies

None

Settings

root (default) | character vector

Select a user name for the operating system on the target hardware.

Examples

Set Device User Name

1. In the Simulink^® Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameters dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to either:

   • Xilinx Zynq ZC702 evaluation kit

   • Xilinx Zynq ZC706 evaluation kit

   • ZedBoard

   Then, click Apply.

   The parameter values under Hardware board settings are automatically populated to their default values.

4. If you chose Xilinx Zynq ZC706 evaluation kit or ZedBoard, set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.

5. From the Board Parameters group, select a Username and click Apply.

6. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b