Main Content

Explicitly Create State-Space Model Containing Known Parameter Values

This example shows how to create a time-invariant, state-space model containing known parameter values using ssm.

Define a state-space model containing two independent, AR(1) states with Gaussian disturbances that have standard deviations 0.1 and 0.3, respectively. Specify that the observation is the deterministic sum of the two states. Symbolically, the equation is



Specify the state-transition coefficient matrix.

A = [0.5 0; 0 -0.2];

Specify the state-disturbance-loading coefficient matrix.

B = [0.1 0; 0 0.3];

Specify the measurement-sensitivity coefficient matrix.

C = [1 1];

Define the state-space model using ssm.

Mdl = ssm(A,B,C)
Mdl = 
State-space model type: ssm

State vector length: 2
Observation vector length: 1
State disturbance vector length: 2
Observation innovation vector length: 0
Sample size supported by model: Unlimited

State variables: x1, x2,...
State disturbances: u1, u2,...
Observation series: y1, y2,...
Observation innovations: e1, e2,...

State equations:
x1(t) = (0.50)x1(t-1) + (0.10)u1(t)
x2(t) = -(0.20)x2(t-1) + (0.30)u2(t)

Observation equation:
y1(t) = x1(t) + x2(t)

Initial state distribution:

Initial state means
 x1  x2 
  0   0 

Initial state covariance matrix
     x1    x2   
 x1  0.01   0   
 x2   0    0.09 

State types
     x1          x2     
 Stationary  Stationary 

Mdl is an ssm model containing unknown parameters. A detailed summary of Mdl prints to the Command Window. By default, the software sets the initial state means and covariance matrix using the stationary distributions.

It is good practice to verify that the state and observations equations are correct. If the equations are not correct, then it might help to expand the state-space equation by hand.

Simulate states or observations from Mdl using simulate, or forecast states or observations using forecast.

See Also

| |

Related Examples

More About