Main Content


Configure data type for the data captured from a signal


setDataType(DC,name,type) specifies the data type, type, for the data captured from a signal, name.

Input Arguments

collapse all

Customized data capture object, specified as an hdlverifier.FPGADataReader System object.

Specify a signal name matching one that you configured when you generated the object. The signal must be configured as a data signal.

The bit width of the data type must match the bit width of the captured signal. This size is the width you specified for the port on the generated IP.

The function supports these data types, depending on the bit width of the captured signal: boolean, uint8, int8, uint16, int16, half, uint32, int32, single, uint64, int64, double, and numerictype.

Version History

Introduced in R2017a