To estimate polynomial models, you must provide input delays and model orders. If you already have insight into the physics of your system, you can specify the number of poles and zeros.
In most cases, you do not know the model orders in advance. To get initial model orders and delays for your system, you can estimate several ARX models with a range of orders and delays and compare the performance of these models. You choose the model orders that correspond to the best model performance and use these orders as an initial guess for further modeling.
Because this estimation procedure uses the ARX model structure, which includes the A and B polynomials, you only get estimates for the na, nb, and nk parameters. However, you can use these results as initial guesses for the corresponding polynomial orders and input delays in other model structures, such as ARMAX, OE, and BJ.
If the estimated nk is too small, the leading nb coefficients are much smaller than their standard deviations. Conversely, if the estimated nk is too large, there is a significant correlation between the residuals and the input for lags that correspond to the missing B terms. For information about residual analysis plots, see topics on the Residual Analysis page.
The following procedure assumes that you have already imported your data into the app and performed any necessary preprocessing operations. For more information, see Represent Data.
To estimate model orders and input delays in the System Identification app:
In the System Identification app, select Estimate > Polynomial Models to open the Polynomials Models dialog box.
The ARX model is already selected by default in the Structure list.
For time-series models, select the AR model structure.
Edit the Orders field to specify a range of poles, zeros, and delays. For example, enter the following values for na, nb, and nk:
[1:10 1:10 1:10]
As a shortcut for entering
1:10 for each required model order,
click Order Selection.
Click Estimate to open the ARX Model Structure Selection window, which displays the model performance for each combination of model parameters. The following figure shows an example plot.
Select a rectangle that represents the optimum parameter combination and click Insert to estimates a model with these parameters. For information about using this plot, see Selecting Model Orders from the Best ARX Structure.
This action adds a new model to the Model Board in the System Identification app.
The default name of the parametric model contains the model type and the number of
poles, zeros, and delays. For example,
arx692 is an ARX model with
nb=9, and a delay of two samples.
Click Close to close the ARX Model Structure Selection window.
You cannot estimate model orders when using multi-output data.
After estimating model orders and delays, use these values as initial guesses for estimating other model structures, as described in Estimate Polynomial Models in the App.
If you are working with a multiple-output system, you must use the
selstruc commands one output at a time. You must subreference the
correct output channel in your estimation and validation data
For each estimation, you use two independent data sets—an estimation data set and a validation data set. These independent data set can be from different experiments, or data subsets from a single experiment. For more information about subreferencing data, see Select Data Channels, I/O Data and Experiments in iddata Objects and Select I/O Channels and Data in idfrd Objects.
For an example of estimating model orders for a multiple-input system, see Estimating Delays in the Multiple-Input System in System Identification Toolbox Getting Started Guide.
struc command creates a matrix of possible model-order
combinations for a specified range of na,
For example, the following command defines the range of model orders and delays
NN = struc(2:5,1:5,1:5))
arxstruc command takes the output from
struc, estimates an ARX model for each model order, and compares
the model output to the measured output.
arxstruc returns the
loss for each model, which is the normalized sum of squared
For example, the following command uses the range of specified orders
NN to compute the loss function for single-input/single-output
data_e and validation data
V = arxstruc(data_e,data_v,NN);
Each row in
NN corresponds to one set of orders:
[na nb nk]
selstruc command takes the output from
arxstruc and opens the ARX Model Structure Selection window to
guide your choice of the model order with the best performance.
For example, to open the ARX Model Structure Selection window and interactively choose the optimum parameter combination, use the following command:
For more information about working with the ARX Model Structure Selection window, see Selecting Model Orders from the Best ARX Structure.
To find the structure that minimizes Akaike's Information Criterion, use the following command:
nn = selstruc(V,'AIC');
nn contains the corresponding
Similarly, to find the structure that minimizes the Rissanen's Minimum Description Length (MDL), use the following command:
nn = selstruc(V,'MDL');
To select the structure with the smallest loss function, use the following command:
nn = selstruc(V,0);
After estimating model orders and delays, use these values as initial guesses for estimating other model structures, as described in Using polyest to Estimate Polynomial Models.
delayest command estimates the time delay in
a dynamic system by estimating a low-order, discrete-time ARX model and treating the delay
as an unknown parameter.
delayest assumes that
and that there is a good signal-to-noise ratio, and uses this information to estimate
To estimate the delay for a data set
data, type the following at the
If your data has a single input, MATLAB® computes a scalar value for the input delay—equal to the number of data samples. If your data has multiple inputs, MATLAB returns a vector, where each value is the delay for the corresponding input signal.
To compute the actual delay time, you must multiply the input delay by the sample time of the data.
You can also use the ARX Model Structure Selection window to estimate input delays and model order together, as described in Estimating Model Orders at the Command Line.
You generate the ARX Model Structure Selection window for your data to select the best-fit model.
For a procedure on generating this plot in the System Identification app, see Estimating Orders and Delays in the App. To open this plot at the command line, see Estimating Model Orders at the Command Line.
The following figure shows a sample plot in the ARX Model Structure Selection window.
You use this plot to select the best-fit model.
The horizontal axis is the total number of parameters — na + nb.
The vertical axis, called Unexplained output variance (in %), is the portion of the output not explained by the model—the ARX model prediction error for the number of parameters shown on the horizontal axis.
The prediction error is the sum of the squares of the differences between the validation data output and the model one-step-ahead predicted output.
nk is the delay.
Three rectangles are highlighted on the plot in green, blue, and red. Each color indicates a type of best-fit criterion, as follows:
Red — Best fit minimizes the sum of the squares of the difference between the validation data output and the model output. This rectangle indicates the overall best fit.
Green — Best fit minimizes Rissanen MDL criterion.
Blue — Best fit minimizes Akaike AIC criterion.
In the ARX Model Structure Selection window, click any bar to view the orders that give the best fit. The area on the right is dynamically updated to show the orders and delays that give the best fit.
For more information about the AIC criterion, see Loss Function and Model Quality Metrics.