Main Content

Magnetic Flux Density in H-Shaped Magnet

This example shows how to solve a 2-D magnetostatic model for a ferromagnetic frame with an H-shaped cavity. This setup generates a uniform magnetic field due to the presence of two coils.

Create a geometry that consists of a rectangular frame with an H-shaped cavity, four rectangles representing the two coils, and a unit square representing the air domain around the magnet. Specify all dimensions in millimeters, and use the value convfactor = 1000 to convert the dimensions to meters.

convfactor = 1000;

Create the H-shaped geometry to model the cavity.

xCoordsCavity = [-425 -125 -125 125 125 425 425 ...
               125 125 -125 -125 -425]/convfactor;
yCoordsCavity = [-400 -400 -100 -100 -400 -400 ...
               400 400 100 100 400 400]/convfactor;
RH = [2;12;xCoordsCavity';yCoordsCavity'];

Create the geometry to model the rectangular ferromagnetic frame.

RS = [3;4;[-525;525;525;-525;-500;-500;500;500]/convfactor];
zeroPad  = zeros(numel(RH)-numel(RS),1);
RS = [RS;zeroPad];

Create the geometries to model the coils.

RC1 = [3;4;[150;250;250;150;120;120;350;350]/convfactor;
RC2 = [3;4;[-150;-250;-250;-150;120;120;350;350]/convfactor;
RC3 = [3;4;[150;250;250;150;-120;-120;-350;-350]/convfactor;
RC4 = [3;4;[-150;-250;-250;-150;-120;-120;-350;-350]/convfactor;

Create the geometry to model the air domain around the magnet.

RD = [3;4;[-1000;1000;1000;-1000;-1000; ...

Combine the shapes into one matrix.

gd = [RS,RH,RC1,RC2,RC3,RC4,RD];

Create a set formula and create the geometry.

ns = char('RS','RH','RC1','RC2','RC3','RC4','RD');
g = decsg(gd,'(RS+RH+RC1+RC2+RC3+RC4)+RD',ns');

Plot the geometry with the face labels.


Plot the geometry with the edge labels.


Create an femodel object for magnetostatic analysis and include the geometry in the model.

model = femodel(AnalysisType="magnetostatic", ...

Generate a mesh with fine refinement in the ferromagnetic frame.

model = generateMesh(model,Hface={2,0.01},Hmax=0.1,Hgrad=2);

Specify the vacuum permeability value in the SI system of units.

model.VacuumPermeability = 1.25663706212e-6;

Specify a relative permeability of 1 for all domains.

model.MaterialProperties = ...

Now specify the large constant relative permeability of the ferromagnetic frame.

model.MaterialProperties(2) = ...

Specify the current density values on the upper and lower coils.

model.FaceLoad([5,6]) = faceLoad(CurrentDensity=1E6);
model.FaceLoad([4,7]) = faceLoad(CurrentDensity=-1E6);

Specify that the magnetic potential on the outer surface of the air domain is 0.

model.EdgeBC([5,6,13,14]) = edgeBC(MagneticPotential=0);

Solve the model.

R = solve(model)
R = 
  MagnetostaticResults with properties:

      MagneticPotential: [32277x1 double]
          MagneticField: [1x1 FEStruct]
    MagneticFluxDensity: [1x1 FEStruct]
                   Mesh: [1x1 FEMesh]

Plot the magnitude of the flux density.

Bmag = sqrt(R.MagneticFluxDensity.Bx.^2 + ...

pdeplot(R.Mesh,XYData=Bmag, ...
               FlowData=[R.MagneticFluxDensity.Bx ...


[1] Kozlowski, A., R. Rygal, and S. Zurek. "Large DC electromagnet for semi-industrial thermomagnetic processing of nanocrystalline ribbon." IEEE Transactions on Magnetics 50, issue 4 (April 2014): 1-4.