Main Content

Refine factor

Option to produce additional output values between simulation time steps

Model Configuration Pane: Data Import/Export


Specify the amount of additional output values for the variable-step solver to produce. A refine factor of 1 specifies that the simulation produce the same number of output values. A refine factor of 2 specifies that the simulation produce twice the number of output values. The solver does not produce these values by taking additional major time steps.

This parameter is supported only for simulations that use a variable-step solver. In simulations that use a fixed-step solver, this parameter is ignored.


To enable this parameter, set Output options to Refine output.


1 (default) | positive integer greater than zero

By default, the refine factor is 1, and the simulation does not produce additional output values. When you specify a refine factor of 2, the simulation produces approximately twice the number of output values by calculating an additional output value midway between each major time step.

Recommended Settings

The table summarizes recommended values for this parameter based on considerations related to code generation.

DebuggingNo impact
TraceabilityNo impact
EfficiencyNo recommendation
Safety precautionNo recommendation

Programmatic Use

Parameter: Refine
Type: string | character vector
Value: positive integer greater than zero
Default: '1'

Version History

Introduced before R2006a