File Log

Write signal data file log on target computer

Since R2020b

• 

Libraries:
Simulink Real-Time / Logging

Description

When you enable logging service, the File Log block logs the signal at its input port to the target computer file system.

For more information about the file logging workflow, see Signal Logging and Streaming Basics.

Examples

Parameter Tuning and Data Logging

Use real-time parameter tuning and data logging with Simulink® Real-Time™.

Open Script

Tune Decimation for File Log Data Without Model Rebuild

Use tunable decimation for data logging.

Open Script

Ports

Input

S — Signal data for file log

scalar | vector | matrix | array | bus | nonvirtual bus

Provides the signal data input for the file log.

Parameters

Decimation — Applies decimation to file log data

1 (default) | integer

The decimation parameter value selects decimation for the samples captured in the file log.

By using the File Log decimation functions, you can tune the decimation parameter programmatically for the File Log in the model. These functions are:

• getAllFileLogBlocks

• getFileLogDecimation

• setFileLogDecimation

Programmatic Use

decimation

Input Processing — Selects processing mode for file log data

Elements as channels (sample based) (default) | Columns as channels (frame based)

The input processing parameter value selects whether the logged signal data is processed and sent to the Simulation Data Inspector in sample or frame processing mode. For more information about sample-based data and frame-based data in the Simulation Data Inspector, see View Data in the Simulation Data Inspector.

Programmatic Use

inputProcessing

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2020b

R2022a: Decimation, Log Retention, and Frame-Based Input

Functions let you get and set decimation values for File Log blocks in a model. Also, functions let you control when File Log recording starts and stops.